Philips HTL9100 Manual Do Utilizador

12 EN

Surround sound mode

Experience an immersive audio experience with 

surround sound modes.

1 

Press V.SURR to select a surround mode.

•  Surround: Creates a surround listening 

experience. The  V.SURR indicator on 

the main unit lights up.

•  Stereo: Two-channel stereo sound. 

Ideal for listening to music.

Equalizer

Change the high frequency (treble) and low 

frequency (bass) settings of the SoundBar.

1 

Press TREBLE +/- or BASS +/- to change 

the frequency.

Treble/bass indicator

•  When you change frequency levels, one 

or multiple indicator (up to 8 indicators) 

on the main unit light up to indicate a 

frequency level. The more indicators light 

up, the more the treble or bass is.

  

Auto volume

Turn the auto volume on to keep the volume 

constant when you switch to a different source. 

It also compresses the sound dynamics, 

increasing the volume for quiet scenes and 

decreasing the volume for loud scenes. 

1 

Press AUTO VOLUME  ON/OFF to turn 

auto volume on or off.

 

»

When auto volume is turned on, the 

V.SURR indicator blinks once.

 

»

When auto volume is turned off, the 

V.SURR indicator blinks twice.

-4

 4

Synchronize picture and sound

If the audio and video are not synchronized, 

delay the audio to match the video.

1 

Press AUDIO SYNC +/- to synchronize 

the audio with the video.

•  AUDIO SYNC + increases the sound 

delay, and AUDIO SYNC - decreases 

the sound delay.

 

»

When you change the value of sound 

delay, the more value/delay you set, 

the more indicators on the main unit 

light up.

Night mode

For quiet listening, decrease the volume of loud 

sounds when audio is played. Night mode is 

only available for Dolby Digital soundtracks. 

1 

Press NIGHT MODE ON/OFF to turn 

night mode on or off.

 

»

When night mode is turned on, the 

V.SURR indicator blinks once.

 

»

When night mode is turned off, the 

V.SURR indicator blinks twice.

Note

 

•

If auto volume is set to turned on, you cannot enable 

the night mode.

MP3 player

Connect your MP3 player to play your audio 

files or music.
What you need

•  An MP3 player.

•  A 3.5mm stereo audio cable.

1 

Using the 3.5mm stereo audio cable, 

connect the MP3 player to the AUDIO-IN 

connector on your SoundBar.

2 

Press AUDIO-IN.