Philips HTL9100 Manual Do Utilizador

14 EN

5 Wall mount

your SoundBar

Before you mount your SoundBar on the wall,

read all safety precautions. (see 'Safety' on page

Wall mount

Note

•

You must detach the surround speakers from the main

unit before wall mounting or un-mounting.

•

Improper wall mounting may result in accident, injury or

damage. If you have any query, contact Consumer Care

in your country.

•

Secure the wall mount to a wall that can support the

combined weight of the product and the wall mount.

•

Before wall mount, you need not remove the four

rubber feet at the bottom of the soundbar, otherwise

the rubber feet cannot be fixed back.

Screw length/diameter

Depend on the type of wall mounting this wall

mount bracket, make sure that you use screws

of a suitable length and diameter.

For information about how to wall your

SoundBar, see the wall mount guide.

> 25mm

3 - 3.5mm

6 Product

specifications

Note

•

Specifications and design are subject to change without

notice.

Amplifier

• Total output power:

210W RMS (+/- 0.5 dB, 30% THD) /

168W RMS (+/- 0.5 dB, 10% THD)

• Frequency response: 20 Hz-20 kHz / ±3 dB

• Signal-to-noise ratio: > 65 dB (CCIR) /

(A-weighted)

• Input sensitivity:

• AUX: 400 mV

• AUDIO-IN: 220 mV

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

Bluetooth

• Bluetooth profiles: A2DP

• Bluetooth version: 2.1 + EDR

Main unit

• Power supply: 110-240 V~, 50/60 Hz

• Power consumption: 50 W

• Standby power consumption: ≤ 0.5 W

• Speaker impedance:

• Woofer: 8 ohm

• tweeter: 8 ohm

• Speaker drivers: 2 x 63.5 mm (2.5") woofer

+ 2 x 25.4 mm (1") tweeter

• Dimensions (WxHxD):

1035 x 73 x 156 mm (with 2 surround

speakers attached)

• Weight: 3.9 kg