Yamaha DVX-700 Manual Do Utilizador

■ Inserting batteries into the remote 

1 Press 

 on the battery cover and open the cover.

2 Insert the two supplied batteries (AA, R6, UM-3) into 

the battery compartment. 
Insert the batteries according to the polarity markings 
(+ and –).

3 Close the battery cover.

If the batteries run low, the effective operation distance of the 
remote control decreases considerably. If this happens, 
replace the batteries with two new ones as soon as possible. 

– Do not use an old battery together with new one. 
– Do not use different types of batteries (for 

example, alkaline and manganese) together. Each 
type of battery has its own characteristics even if 
they are similar in shape.

– If the batteries run out, immediately remove them 

from the remote control to prevent an explosion or 
acid leak.

– Dispose of the batteries according to the regional 

regulations.

– If a battery starts leaking, dispose of it 

immediately. 
Be careful not to let leaking battery acid come into 
contact with your skin or clothing. Before inserting 
new batteries, wipe the compartment clean.

– Replace the batteries within two minutes to 

preserve the preset code in the remote control.

Remove the transparent sheet before using the remote 
control.

■ Using the remote control

Use the remote control within 6 m of the DVD controller 
and point it toward the remote control sensor.

1 Use the Input selection buttons on the remote control 

to select the input source you wish to control (for 
example DVD/USB).

→

 The selected source appears in the front panel 

display. 
When the button contains several input sources such 
as DVD/USB and INPUT 1-4 buttons, the input 
source switches each time you press the button.

2 Operate the desired function (for example, h or b 

/ a).

– Be careful not to spill liquid on the remote control.
– Be careful not to drop the remote control.
– Do not leave the remote control in the following 

places:
– hot or humid places, such as near a heater or in a 

bathroom

– extremely cold places
– dusty places

– To operate your TV with the remote control, you 

need to set the preset code. 
Refer to “Setting the preset code” on page 66 for 
how to change the preset code.

1

3

2

STANDBY / ON

30˚

30˚

TV/ STB

DVD/ USB