Yamaha DVX-700 Manual Do Utilizador

■ Setting the video input/output

– Make sure that you have completed all the 

necessary connections (Refer to “Connecting a 
TV” on page 17).

– If the settings you have selected are not 

appropriate, you can reset DVD settings to the 
initial factory settings (Refer to “System menu” on 
page 65).

1 Press DVD/USB repeatedly until “DVD” appears in 

the front panel display.

2 Turn on the TV and set to the correct video-in 

channel.

→

 You should see the background screen on the TV.

– Usually this channel is between the lowest and 

highest channels and may be called FRONT, A/V 
IN or VIDEO. See your TV manual for more 
details.

– Or, you may go to channel 1 on your TV, then 

press the Channel down button repeatedly until you 
see the Video In channel.

– Or, the TV remote control may have a button or 

switch that chooses different video modes.

Set the aspect ratio of the DVD controller according to the 
TV you have connected. The format you select must be 
available on the disc. If it is not, the TV display setting 
will not affect the picture during playback.

1 Press SETUP on the remote control. 

DVD setup menu is displayed on the screen.

2 Press 

 / 

 / 

 / 

 on the remote control to 

highlight [Initial Settings], and then press ENTER.

3 Press 

 / 

 on the remote control to highlight 

[Video Output], and then press ENTER.

TV/ STB

Play Mode

Initial Setting

Disc Navigator

Video Adjust

Initial Setting

Video Output

Language

Display

Options

TV Screen 

4:3 (Letter Box)

Component Out 

Interlace

HDMI Resolution 720x480p

HDMI Color 

Component