Yamaha DVX-700 Manual Do Utilizador

1 Press DVD/USB repeatedly to switch the input source 

to DVD.

2 Press SETUP on the remote control.

DVD setup menu appears.

3 Press 

 / 

 / 

 / 

 to highlight [Initial Settings], 

then press ENTER.

4 Press 

 / 

 to highlight the item that you want to 

adjust, then press ENTER.
Refer to the following explanations.

5 Press ENTER to confirm.

Repeat steps 3 and 4 if necessary.

6 Press SETUP to close the menu.

If the settings you have selected are not appropriate, 
you can reset DVD settings to the initial factory 
settings (Page 65).

■ Video Output

Configure the video output settings.

Set the aspect ratio according to the TV you have 
connected.

Select this if you have a conventional TV. In this case, a 
wide picture with black bands on the upper and lower 
portions of the TV screen will be displayed.

Select this if you have a conventional TV and want both 
sides of the picture to be trimmed or formatted to fit your 
TV screen.

If the disc does not support an aspect ratio of 4:3 
(Pan&Scan), the content is displayed in 4:3 (Letter 
Box).

Select this if you have a wide-screen TV.

Select this if a wide-screen TV is connected to the DVD 
controller with an HDMI cable, and set HDMI Resolution 
to either [1920 x 1080p], [1920 x 1080i], or [1280 x 
720p]. When playing back a content whose aspect ratio is 
4:3, black bars cover the sides of the screen. 

Select the video type output via the COMPONENT 
VIDEO OUTPUT jacks.

Select this if the connected TV has progressive display 
function. When you select this and press ENTER, the 
confirmation screen appears.
Press ENTER again to confirm the setting. If you want to 
cancel the setting, press RETURN.

TV/ STB

DVD/ USB

When using Numeric 
keypad 0-9
Switch FUNC./10KEY to 
10KEY

Initial Setting

Video Output

Language

Display

Options

TV Screen 

4:3 (Letter Box)

Component Out 

Interlace

HDMI Resolution 720x480p

HDMI Color 

Component