Denon AVR-2310CI Manual Do Utilizador

9

 

 

 : Moves the cursor (Up/Down/Left/Right) 

 : Decision the setting

 : Return to previous menu

:

  Displaying the menu

  Cancel the menu

Adjust  the  low-frequency 
effects level (LFE).

  For proper playback of the different program sources, we recommend 

setting to the values below.

 

•  Dolby Digital sources :  “0dB”

 

•  DTS movie sources : 

“0dB”

 

•  DTS music sources : 

“–10dB”

Assign center channel signal 
to front left and right channels 
for wider sound.

Assign  front  L/R  signal  also 
to  surround  channels,  for 
wider sound.

ON : Set.
OFF : Do not set.

Shift  sound  image  center 
to  front  or  rear,  to  adjust 
playback balance.

Assign center channel signal 
to front left and right channels 
for wider sound.

Adjust  delay  time  to  control 
sound stage size.

Adjust  the  strength  of  the 
surround effect.

  Set  to  a  lower  level  if  the  positioning  and  sense  of  phase  of  the 

surround signals seems unnatural.

Determine  size  of  acoustic 
environment.

“Room  Size”  does  not 
indicate the size of the room 
in which sources are played.

Small : Simulate acoustics of a small room.
Medium small : Simulate acoustics of a medium-small room.
Medium : Simulate acoustics of a medium room.
Medium large : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.

Detects the source’s surround 
back channel signal and sets 
the optimum surround mode 
automatically.

ON : Set.
OFF : Do not set.

Sets the method of 
generating of the surround 
back channel.

n

ON : The surround back channel is used.
OFF : No signal is played from the surround back channels.

n

Set this to set the method of generating of the surround back channel 
for  sources  that  do  not  include  surround  back  signals  and  when  you 
do not want to play the surround back signals included in the source. 
Check the audio signals of the source being played before making this 
setting.
OFF : No signal is played from the surround back channels.
MTRX  ON  :  Generate  and  play  the  surround  back  signals  from  the 
surround channel signals.
PLgx  CINEMA

z

1  :  Generate  and  play  the  surround  back  signals  by 

decoding the signals in the “Dolby Pro Logic gx Cinema” mode.
PLgx  MUSIC

z

2  :  Generate  and  play  the  surround  back  signals  by 

decoding the signals in the “Dolby Pro Logic gx Music” mode.
ES  MTRX  :  Generate  and  play  the  surround  back  signals  from  the 
surround channel signals of the DTS source.
ES  DSCRT

z

3  :  Play  the  surround  back  signals  included  in  the  6.1-

channel DTS source.
DSCRT  ON

z

3  :  Play  the  surround  back  signals  included  in  the  7.1-

channel source.
z1 :  This  can  be  selected  when  “S.Back”  in  the  “Speaker  Config.” 

settings (vpage 29) is set to “2sp”.

z2 :  This  can  be  selected  when  “S.Back”  in  the  “Speaker  Config.” 

settings (vpage 29) is set to “2sp” or “1sp”.

z3 :  When “AFDM” is set to “ON”, the surround back channel is played 

with the AFDM function. When selected while “AFDM” is set to 
“OFF”, the source’s surround back signals are played.

  This can also be set by pressing 

.

This is valid when the “Amp Assign” setting (vpage 28) is set to “7.1-
channel  surround  back”  or “6.1-channel  surround  back”,  and  when  the 
“S.Back” setting (vpage 29) is set to “Large” or “Small”.