ONKYO MD-105TX Manual Do Utilizador
25
Befor
e Using
Connections
Other Information
Operations
Recording (continued)
6
Press the
REC button.
The MD recorder is now in recording
standby mode.
standby mode.
.
7
Using the AMCS knob, adjust the
recording level.
recording level.
Adjust the recording level.
7-1 Press the EDIT/NO button, then turn
the AMCS knob until “Rec Level?”
appears.
Then, press the AMCS knob.
the AMCS knob until “Rec Level?”
appears.
Then, press the AMCS knob.
When the recording level adjustment
is completed, stop playing the source.
is completed, stop playing the source.
7-2 Turn the AMCS knob to adjust the
recording level.
Adjust the recording level such that the -4
to -2 dB indicator lights when the input
signal is largest. (Also refer to the current
recording level readout displayed in dB.)
recording level.
Adjust the recording level such that the -4
to -2 dB indicator lights when the input
signal is largest. (Also refer to the current
recording level readout displayed in dB.)
Tip:
You can adjust the recording level in 5dB
steps for the range between –60.0 dB and
–30.0 dB, in 2.5 dB steps for the range
between –30.0 dB and –12.5 dB, and in
0.5dB steps for the range between –12.5dB
and +18.0 dB.
Then, press the AMCS knob.
You can adjust the recording level in 5dB
steps for the range between –60.0 dB and
–30.0 dB, in 2.5 dB steps for the range
between –30.0 dB and –12.5 dB, and in
0.5dB steps for the range between –12.5dB
and +18.0 dB.
Then, press the AMCS knob.
REC
EDIT/NO
ANALOG IN
PUSH TO ENTER
(
)
AMCS
R
L
PUSH TO ENTER
(
)
AMCS
PUSH TO ENTER
(
)
AMCS
0
10
2
OVER
20
40
R
4
L
PUSH TO ENTER
(
)
AMCS
MINIDISC RECORDER
STANDBY
CD
INPUT
DUBBING
PUSH TO ENTER
(
)
AMCS
DISPLAY
EDIT / NO
YES
REC
STANDBY / ON
MD-
105TX
REC MODE
EDIT/NO
REC MODE
REC
AMCS
Adjust the level so the
OVER indicator will
not light up.
OVER indicator will
not light up.
Adjust the level in the range between –4
and –2 for the maximum signal level.
and –2 for the maximum signal level.
(Continued on the next page)