Roland Fantom-X8 Manual Do Utilizador
169
Recording Songs
Before you record a new song, you must specify the time signature.
However, a time signature of 4/4 is automatically specified when
you perform the Song Initialize operation or when the power is
turned on, so you will need to make this setting only if you want to
record a new song in a different time signature.
However, a time signature of 4/4 is automatically specified when
you perform the Song Initialize operation or when the power is
turned on, so you will need to make this setting only if you want to
record a new song in a different time signature.
1.
Press [SONG EDIT] to access the Song Play screen.
2.
Press [F8 (Micro Edit)].
The Microscope screen appears.
3.
Press [F7 (Trk/Ch)].
The Trc/Ch Select window appears.
4.
Press
or
to move the cursor to “Track.”
5.
Select “BEAT” (beat track).
The Microscope screen for the beat track appears.
fig.18-001_50
6.
Move the cursor to “Beat Change,” and specify the time
signature.
signature.
If you want to change time signatures midway through the
song, refer to
song, refer to
7.
Press [EXIT] to return to the previous screen.
Specifying the Time Signature of a
Pattern
Pattern
Each pattern has a Pattern Beat setting that manages the time
signature of that pattern. The pattern beat acts as a guide when the
pattern is played or recorded, and is handled independently of the
time signature of the song (i.e., the time signature recorded in the
beat track).
signature of that pattern. The pattern beat acts as a guide when the
pattern is played or recorded, and is handled independently of the
time signature of the song (i.e., the time signature recorded in the
beat track).
The pattern beat is normally set to a time signature of 4/4, but you
can change this setting when the song has a time signature other
than 4/4, or when you want to record a pattern with a time signature
different than that of the song.
can change this setting when the song has a time signature other
than 4/4, or when you want to record a pattern with a time signature
different than that of the song.
Only one pattern beat setting can be specified at the beginning of
each pattern. This means that it is not possible to change time
signatures midway through a pattern.
each pattern. This means that it is not possible to change time
signatures midway through a pattern.
1.
Press [SONG EDIT] to access the Song Play screen.
2.
Press [F2 (Ptn)] to light it into red.
The Pattern Play screen appears.
3.
Turn the VALUE dial or press [INC][DEC] to select the pattern.
4.
Press [F5 (Ptn Beat)].
fig.18-002_50
5.
Move the cursor, and set the time signature.
Set the tempo at which the song is to be recorded.
1.
Press [TEMPO].
The Tempo window appears.
fig.17-004_50
2.
Turn the VALUE dial or press [INC][DEC] to set the
playback tempo.
playback tempo.
• If you press [F7 (Click)] to light it into red, a click will sound at
the specified tempo. This will switch on/off each time you press
the button.
the button.
• By pressing [F6 (Tap)] you can set the tempo to the timing at
which you press the button (Tap Tempo). Press the button three
or more times at quarter-note intervals of the desired tempo.
or more times at quarter-note intervals of the desired tempo.
3.
When you have finished making settings, press [F8
(Close)].
(Close)].
Specify the Time Signature
Setting the tempo
Fantom-X678_r_e.book 169 ページ ２００５年５月１２日 木曜日 午後４時４０分