Roland Fantom-X8 Manual Do Utilizador

Página de 348
 
205
Playing a Phrase at the Touch of a Finger (RPS Function)
 
A performance that uses the RPS function can be recorded in real 
time in the same way as a conventional performance. This provides 
an easy way to remix patterns and create a song.
 
If you use the RPS function during realtime recording, the 
pattern performance will be recorded just as it occurs.
 
1.
 
Make sure that preparations for the RPS function have been 
made correctly.
 
2.
 
Access the PLAY screen for the mode in which you want to 
perform.
 
3.
 
Press [RPS] to turn on the RPS function.
 
4.
 
Press [REC].
 
The [REC] indicator will blink, and the Realtime Rec Standby 
window appears. In this window you can make various settings 
for realtime recording.
 
fig.18-003_50
 
5.
 
Specify how recording is to take place.
 
 
 
 
6.
 
Press [PLAY].
 
The Recording Standby window will close, the [REC] indicator 
will change from blinking to lit, and recording will begin.
 
7.
 
Press a key or pad to which a pattern is assigned.
 
The assigned patterns will be played back according to the keys 
or pads you press, and their performances will be recorded.
 
If the Count In parameter is set to “WAIT NOTE” in the 
Recording Standby window, recording will not begin even if 
you press a key that is assigned to a pattern, or a key that is 
assigned as a Stop Trigger key.
 
8.
 
When you are finished recording, press [STOP].
 
The [REC] indicator will go dark.
 
Recording a Performance Using 
the RPS Function
Fantom-X678_r_e.book 205 ページ 2005年5月12日 木曜日 午後4時40分