Roland Fantom-X8 Manual Do Utilizador

 

In Patch mode you can use two multi-effects (MFX1, MFX2), one 
chorus, and one reverb. Multi-effect 1 (MFX1) will operate according 
to the effect settings of the patch or rhythm set assigned to the 
Keyboard part. Multi-effect 2 (MFX2) will operate according to the 
effect settings of the patch or rhythm set assigned to the Pad part. 
Chorus and reverb will both operate according to the settings of the 
patch or rhythm set assigned to either the Keyboard part or the Pad 
part.

Here you can make overall settings for effects, and the output 
destination and level of each signal.

 

fig.22-004_50

 

 

 

fig.22-005

 

Select the part for which you want to make settings.

 

 KBD, PAD

 

Select the tone for which you want to make settings.

 

 1–4

 

Specifies how the direct sound of each patch will be output.

 

Output in stereo through multi-effects. You can also 
apply chorus or reverb to the sound that passes 
through multi-effects.

 

Output to the OUTPUT A (MIX) jack or OUTPUT B 
jack in stereo without passing through multi-effects.

 

Output to the INDIVIDUAL 1–4 jacks in mono 
without passing through multi-effects.

 

Outputs according to the settings for each tone.

 

If you've made settings so that sounds are separately routed to 
the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, but no plug 
is actually inserted in the INDIVIDUAL 2 jack, the sounds 
routed to INDIVIDUAL 1 and INDIVIDUAL 2 will be mixed 
and output from the INDIVIDUAL 1 jack.

• This parameter is 

 

 when a rhythm set is 

being selected. You can specifies for each rhythm set how the 
direct sound will be output.

 

If the Mix/Parallel parameter is set to “MIX,” all sounds are 
output from the OUTPUT A (MIX) jacks in stereo (p. 230).

Fantom-X678_r_e.book 207 ページ ２００５年５月１２日　木曜日　午後４時４０分