Roland Fantom-X8 Manual Do Utilizador

 

Here we will explain how to make multi-effects settings in 
Performance mode. 

 

fig.22-008_50

 

Each time you press the [F3 (MFX1/2/3)] button, it will 
alternate between 1, 2, and 3.

 

 

 

Use this parameter to select from among the 78 available multi-
effects. For details on multi-effects parameters, refer to 

 

 

 

00 THROUGH– 78 SYNPATHETHIC RESONANCE 
In this setting screen, you can edit the parameters of 
the multi-effects that is selected by the Multi-effects 
Type setting. For details on the parameters that can 
be edited, refer to 

 

 

You can use the REALTIME CONTROL knobs to edit up to four 
of the most important parameters, which have been pre-selected 
for each type of multi-effect. The knobs shown in the screen 
correspond to the Realtime Control knobs. When you enter the 
MFX 1–3 screen, the indicator at the right of the Realtime 
Control knobs will go out, and the Realtime Control knobs can 
be used to edit the MFX parameters. If you once again press the 
button located at the right of the Realtime Control knobs so the 
indicator is lit, the knobs will control their original functions. 
When you exit the MFX 1–3 screen, the indicator will 
automatically return to its previous lit state.

 

Parameters marked by 

 can be selected as a multi-effect 

 

In Patch mode, the Keyboard part can use MFX1 and the Pad 
part can use MFX2.

 

fig.22-009_50

 

 

 

Sets the MIDI message used to change the multi-effects parameter 
with the multi-effects control.

 

 

Multi-effects control will not be used.

 

 

Controller numbers 1–31, 33–95

 

For more information about Control Change messages, please 
refer to 

 

 

Pitch Bend

 

Aftertouch

 

MIDI messages used as common multi-
effects controls.

 

If you want to use common controllers for the entire Fantom-X, 
select “SYS CTRL 1”–”SYS CTRL 4.” MIDI messages used as 
System Control 1–4 are set with the Sys Ctrl 1–4 Source 
parameters (p. 233).

 

In patch/rhythm set mode, there are parameters that determine, 
for each tone/rhythm tone, whether or not Pitch Bend, 
Controller Number 11 (Expression) and Controller Number 64 
(Hold 1) are received (p. 79). When these settings are “ON,” and 
the MIDI messages are received, then when any change is made 
in the settings of the desired parameter, the Pitch Bend, 
Expression, and Hold1 settings also change simultaneously. If 
you want to change the targeted parameters only, then set these 
to “OFF.”

• There are parameters that determine whether or not specific 

MIDI messages are received for each MIDI channel (p. 79). 
When using the multi-effects control, confirm that any MIDI 
messages used for the multi-effects control will be received. If 
the Fantom-X is set up such that reception of MIDI messages is 
disabled, then the multi-effects control will not function.

Fantom-X678_r_e.book 213 ページ ２００５年５月１２日　木曜日　午後４時４０分