Roland Fantom-X8 Manual Do Utilizador

Página de 348
 
215
Adding Effects
 
Here’s how to specify how MFX 1–3 will be connected.
 
*
This parameter is not found in Patch mode.
 
fig.22-010_50
 
 
 
 
Structure Type
 
Specify how MFX1–3 will be connected.
 
Value:
 
 Type 01–Type 16
 
MFX1–3 TYPE
 
Selects the multi-effect type of MFX1–3.
 
Value:
 
 0 (Through)–78
Here we will explain how to make chorus settings in Performance 
mode. The procedure is the same when making settings in Patch 
mode.
 
fig.22-011_50
 
 
 
 
Type (Chorus Type)
 
Selects either chorus or delay.
 
Value
0 OFF:
 
Neither chorus or delay is used.
 
1 CHORUS:
 
Chorus is used.
 
2 DELAY:
 
Delay is used.
 
3 GM2 CHORUS:
 
General MIDI 2 chorus
 
*
In this setting screen, you can edit the parameters of the chorus/delay 
that is selected by the Chorus Type setting. For details on the 
parameters that can be edited, refer to 
 
 
 
If a number (
) is shown for a parameter in the screen, you 
can use the corresponding Realtime Control knob (far left knob 
is 
– far right knob is 
) to adjust the value of that parameter. 
When you enter the Chorus screen, the indicator at the right of 
the Realtime Control knobs will go out, and the Realtime 
Control knobs can be used to edit the Chorus parameters. If you 
once again press the button located at the right of the Realtime 
Control knobs so the indicator is lit, the knobs will control their 
original functions. When you exit the Chorus screen, the 
indicator will automatically return to its previous lit state.
 
Specifying the multi-effect 
structure (MFX Structure)
 
Making Chorus Settings 
(Chorus)
Fantom-X678_r_e.book 215 ページ 2005年5月12日 木曜日 午後4時40分