Roland Fantom-X8 Manual Do Utilizador

 

The force with which you play the keyboard, or the “velocity” with which you play, can affect 
the volume or timbre of a sound. Aftertouch—downward pressure you apply to a key after 
playing a note—can also affect the sound.

 

fig.02-008

 

While playing the keyboard, move the lever to the left to lower the pitch of the currently 
selected patch, or to the right to raise its pitch. This is known as 

 

. You can also apply 

vibrato by gently pushing the lever away from you. This is known as 

 

.

If you push the lever away from you and at the same time move it to the right or left, you can 
apply both effects at once.

 

fig.02-009.e

 

You can shift the pitch of the keyboard in one-octave units over a range of +/-3 octaves by 
adjusting the value of the Octave Shift parameter.
Use KEY EFFECT [-OCT] or [+OCT] at the left of the screen to make the desired setting.
To return to the original setting, press both buttons simultaneously.

 

If an optional pedal switch (DP series) is connected to the rear panel PEDAL HOLD jack, you 
can press the pedal switch to cause notes to sustain or “hold” even after their keys have been 
released.

 

fig.02-010

There are two types of 
aftertouch: Polyphonic 
Aftertouch, which applies 
aftertouch to individual notes, 
and Channel Aftertouch, 
which applies aftertouch to an 
entire MIDI channel (p. 193).
The Fantom-X can output the 
MIDI data for Polyphonic 
Aftertouch using the pads, and 
Channel Aftertouch using the 
keyboard.

For details on the setting, refer 
to p. 226.

Modulation

Pitch Bend

You can set the amount of 
pitch change for each patch (p. 
67).

For details on the setting, refer 
to p. 226.

Fantom-X678_r_e.book 24 ページ ２００５年５月１２日　木曜日　午後４時４０分