Roland Fantom-X8 Manual Do Utilizador

Creating a Patch

Repeat steps 5-7 to set each parameter you want to edit.

If you wish to save the changes you’ve made, press
[WRITE] to perform the Save operation (p. 59). If you do not
wish to save changes, press [EXIT] to return to the Patch
Play screen.

If you return to the Patch Play screen without saving, an “*”
will be displayed at the left of the patch number, indicating that
the patch settings have been edited.

If you turn off the power or select a different sound while the
display indicates “*,” your edited patch will be lost.

In stead of using [F1] or [F2] in the patch edit screen, you can
also select the edit group by holding down [SHIFT] and
pressing

. It is convenient to use this feature when

the Tone SW/Select window is displayed.

You can edit while viewing a graphic display of the most frequently
used important parameters.Zoom Edit lets you edit the following
parameters.

Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to edit.

Press [PATCH EDIT], and then press [F3 (Zoom Edit)].

The Zoom Edit screen will appear.

fig.06-002_50

The parameters are organized into several edit groups.
Press [F1]–[F4] to select the tab for the parameters that you
want to edit.

•

To switch the parameter you want to edit

Press [F6].

•

To switch to a different part for editing

Press [F7 (Part Select)].

•

To select a tone for editing or switch a tone on/off

Press [F8 (Tone Sw/Sel)].

Use [CURSOR] to move the cursor to the parameter that
you want to edit.

You can use the realtime control knob to set the value.

Turn the VALUE dial or use [INC][DEC] to modify the value.

When you have finished editing, press [EXIT].

“Initialize” means to return the settings of the currently selected
sound to a standard set of values.

The Initialize operation will affect only the currently selected
sound; the sounds that are stored in user memory will not be
affected. If you wish to restore all of the Fantom-X’s settings to
their factory values, perform a Factory Reset (p. 235).

Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to initialize (p. 39).

Hold down [SHIFT] and press [F1 (Init)].

A message will ask you for confirmation.

Press [F8 (Exec)].

The initialization will be carried out, and you’ll be returned to
the previous screen.

To cancel, press [F7 (Cancel)].

Editing in a Graphic Display

(Zoom Edit)

Parameter

page

Parameter

page