Roland Fantom-X8 Manual Do Utilizador
59
Creating a Patch
Cautions When Using a Loop
Waveform
Waveform
With many acoustic instruments such as piano and sax, extreme
timbral changes occur during the first few moments of each note.
This initial attack is what defines much of the instrument’s character.
For such waveforms, it is best to use the complex tonal changes of
the attack portion of the waveform just as they are, and to use the
envelope only to modify the decay portion. If you attempt to use the
envelope to modify the attack portion as well, the characteristics of
the original waveform may prevent you from getting the sound that
you intend.
timbral changes occur during the first few moments of each note.
This initial attack is what defines much of the instrument’s character.
For such waveforms, it is best to use the complex tonal changes of
the attack portion of the waveform just as they are, and to use the
envelope only to modify the decay portion. If you attempt to use the
envelope to modify the attack portion as well, the characteristics of
the original waveform may prevent you from getting the sound that
you intend.
fig.06-006.e
Changes you make to sound settings are temporary, and will be lost
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the internal USER group
(user memory)
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the internal USER group
(user memory)
When you edit the patch settings, an “*” will appear in the Patch
Play screen.
Play screen.
When you perform the save procedure, the data that previously
occupied the save destination will be lost.
occupied the save destination will be lost.
1.
Make sure that the patch you wish to save is selected.
2.
Press [WRITE].
The Write Menu screen appears.
fig.06-007_50
3.
Press [F2 (Patch/Rhythm)].
*
Alternatively, you can use
or
to select “Patch/Rhythm,”
and then press [ENTER].
The Patch Write screen appears.
fig.06-008_50
4.
Assign a name to the patch.
For details on assigning names, refer to
5.
When you have finished inputting the name, press [F8
(Write)].
(Write)].
A screen will appear, allowing you to select the write-
destination patch.
destination patch.
Tone change stored
with the wave
Envelope
for the TVF filter
Resulting
tone change
Looped portion
Time
Level
Saving Patches You’ve
Created (Write)
Fantom-X678_r_e.book 59 ページ ２００５年５月１２日 木曜日 午後４時４０分