Roland Fantom-X8 Manual Do Utilizador

Página de 348
 
71
Creating a Patch
 
TVF ENV
 
F-Env Depth (TVF Envelope Depth)
 
Specifies the depth of the TVF envelope. Higher settings will cause 
the TVF envelope to produce greater change. Negative (-) settings 
will invert the shape of the envelope.
 
Value:
 
 -63– +63
 
F-Env Time KF (TVF Envelope Time Key Follow)
 
Use this setting if you want the TVA envelope times (Time 2–Time 4) 
to be affected by the keyboard location. Based on the TVF envelope 
times for the C4 key (center C), positive (+) settings will cause notes 
higher than C4 to have increasingly shorter times, and negative (-) 
settings will cause them to have increasingly longer times. Larger 
settings will produce greater change.
 
Value:
 
 
-100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0, +10, 
+20, +30, +40, +50, +60, +70, +80, +90, +100
 
fig.06-031.e
 
F-Env Time 1–4 (TVF Envelope Time 1–4) 
 
 
 , 
 
Specify the TVF envelope times (Time 1–Time 4). Higher settings 
will lengthen the time until the next cutoff frequency level is 
reached. (For example, Time 2 is the time over which Level 1 will 
change to Level 2.)
 
Value:
 
 0–127
 
fig.06-037.e
 
F-Env Level 0–4 (TVF Envelope Level 0–4) 
 
Specify the TVF envelope levels (Level 0–Level 4). These settings 
specify how the cutoff frequency will change at each point, relative 
to the standard cutoff frequency (the cutoff frequency value 
specified in the TVF screen).
 
Value:
 
 0–127
 
fig.06-038_50
 
 
 
 
TVA
 
Tone Level 
 
 
 
 
Sets the volume of the tone. This setting is useful primarily for 
adjusting the volume balance between tones.
 
Value:
 
 0–127
 
Level V-Curve (TVA Level Velocity Curve)
 
You can select from seven curves that determine how keyboard 
playing strength will affect the volume. If you do not want the 
volume of the tone to be affected by the force with which you play 
the key, set this to “FIXED.”
 
Value:
 
 FIXED, 1–7
 
fig.06-036
 
Level V-Sens (TVA Level Velocity Sensitivity)
 
Set this when you want the volume of the tone to change depending 
on the force with which you press the keys. Set this to a positive (+) 
value to have the changes in tone volume increase the more 
forcefully the keys are played; to make the tone play more softly as 
you play harder, set this to a negative (-) value.
 
Value:
 
 -63– +63
 
If you wish to make adjustments to the entire patch while 
maintaining the relative values of TVA Level Velocity 
Sensitivity among tones, adjust the Velocity Sens Offset 
parameter (p. 62). However, this setting is shared by the Cutoff 
V-Sens parameter (p. 70).
C4
C3
C2
C1
C5
C6
C7
0
+50
+100
-50
-100
Key
Time
1
2
4
T1
T2
T3
T4
L3
L1
L0
L2
L4
Note off
Cutoff
Frequency
Time
Note on
T: Time    L: Level
3
 
Adjusting the Volume (TVA/TVA 
Env)
1
1
2
3
4
5
6
7
Fantom-X678_r_e.book 71 ページ 2005年5月12日 木曜日 午後4時40分