Aiwa CDC-X237 Manual Do Utilizador

2

2

Take the front panel with you when leaving the car, and
keep it in the supplied carrying case.

Before detaching the front panel, remove the CD to
prevent possible damage to the unit.

Press z to remove the CD.

Press and hold PWR/ATT until the unit turns off.

Press %. (Hold the panel with one hand to prevent
accidentally dropping it.)

Remove the panel.

Engage the left side of the front panel to the left catch
on the unit.

Push the panel forward until it locks. Be sure not to
press any buttons while you are attaching the panel.

Do not touch the connector on the reverse side of the
front panel. This could cause a poor or faulty connection.

PWR/ATT

SEL

DSPL

TU (TUNER)

Jog dial (PUSH-SOURCE)

+/–

• Press PWR/ATT to turn on the unit. The unit also turns

on when you insert a CD.

• Press and hold PWR/ATT until the unit turns off.

Most operations described in this manual require
the unit to be turned on before starting the operation,
unless explicitly stated otherwise.

Press Jog dial (PUSH-SOURCE).
Pressing Jog dial (PUSH-SOURCE) cycles through
source modes in the following order:

TUNER (FM1/FM2/FM3/AM1/AM2) 

→ CD* → AUX

↑

* “CD” does not appear in the display when there is no

CD in the unit.

Turn Jog dial.
VOLUME indicator appears.

Press PWR/ATT briefly.
ATT indicator flashes.

To restore volume, briefly press PWR/ATT again.