Intex Recreation 634 Manual Do Utilizador

(110)  MODEL 634 FILTER PUMP  ENGLISH  7.5” X 10.5” PANTONE 295U  01/31/2007

1.

Before emptying your pool for long term storage, or relocation, be sure the 

water is directed towards an acceptable drain water receptacle away from the 

house. Check local regulations for specific directions regarding disposal of 

swimming pool water.

2.

Disconnect power cord from electrical outlet.

3.

After pool is empty of all water disconnect all hoses from pump and plunger 

valves and remove strainers from pool wall.

4.

Drain all water from inside filter pump.

5.

Leave filter pump pieces & hoses outside to thoroughly air dry.

6.

Twist the plunger collar counter-clockwise removing the water flow control 

mechanism from the plunger housing.

7.

Coat the following O-rings and washers with petroleum jelly for long term 

storage:

•

Air release valve & sediment O-rings (3).

•

Filter housing cover O-ring (5).

•

Pump hose O-rings (10).

•

Strainer valve assembly step washers (11).

•

Flat strainer rubber washers (13).

8.

Discard "OLD" used filter cartridge. Have 1-2 new cartridges available for next 

season’s use.

9.

Place all dry pieces in the original packaging for storage or place in an airtight 

plastic bag.

10. Store the filter pump and accessories in a dry, cool storage location.