Yamaha RX-V3800 Manual Do Utilizador

■

You can clear the function learned for a certain button in 
each control area.

D

AMP

D

SOURCE

1

The selected component name appears in the display 
window (B).

M

LEARN

“LEARN” and the selected component name (ex. 
“DVD”) appear alternately in the display 
window (B).

• Do not press and hold M

. If you hold it down for 

more than 3 seconds, the remote control enters the remote 
control code setting mode.

• If you do not complete each of the following steps within 

30 seconds, the learning mode will be automatically 
canceled. In this case, start over from step 2.

M

CLEAR

“C;OK” appears in the display window (B) if 
clearing was successful. Once “C;OK” appears in the 
display window (B) on the remote control, release 
the ballpoint pen or similar object used to press 
M

 to exit the clearing mode. The remote 

control returns to the learning mode.

y
• If you continuously want to clear another function, repeat 

step 3.

• If you continuously want to clear another function for 

another component, press B

k / n to select the 

input area, and then repeat step 3.

• Once you clear a learned function, the button reverts to the 

factory setting (or to the manufacturer setting if you have 
set remote control codes).

M

LEARN

• “C;NG” appears in the display window (B) on the remote 

control if clearing was unsuccessful. In this case, start over from 
step 2.

• “ERROR” appears in the display window (B) if you press 

more than one button simultaneously.