ONKYO TX-SR604E Manual Do Utilizador
46
First Time Setup
—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select “---,” as
explained below.
from the COMPONENT VIDEO OUT, select “---,” as
explained below.
VIDEO 4 is fixed to “---.”
Notes:
• (TX-SR674/674E/8467 only) When the input selector
• (TX-SR674/674E/8467 only) When the input selector
assignment for the COMPONENT VIDEO IN jacks is
set to IN1, IN2 or IN3, the “composite video to S-
Video” and “S-Video to composite video” conversions
will not work.
set to IN1, IN2 or IN3, the “composite video to S-
Video” and “S-Video to composite video” conversions
will not work.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
Input selector
VIDEO IN jack
DVD
IN 1
VIDEO 1
---
VIDEO 2
---
VIDEO 3
---
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
The main menu appears onscreen.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP
RETURN
PLAYLIST/CAT
PLAYLIST/CAT
--/---
TAPE
M D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT
D TUN
SLEEP
10
11
12
INPUT SELECTOR
REMOTE MODE
ZONE2
V
1
V
4
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
LISTENING MODE
T V
VOL
VOL
SAT
VCR
T V
DVD
RECEIVER
C D
INPUT
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
ALBUM
1, 4
2, 3
2
1
RECEIVER
SETUP
2
Use the Up and Down [
]/[
]
buttons to select “0. Video Input,”
and then press [ENTER].
and then press [ENTER].
The Video Input menu appears.
3
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and then use the Left and
Right [
tor, and then use the Left and
Right [
]/[
] buttons to select:
IN1: Use the video component
connected to COMPO-
NENT VIDEO IN 1.
NENT VIDEO IN 1.
IN2: Use the video component
connected to COMPO-
NENT VIDEO IN 2.
NENT VIDEO IN 2.
IN3: Use the video component
connected to COMPO-
NENT VIDEO IN 3.
NENT VIDEO IN 3.
---: Output composite video
and S-Video sources from
the COMPONENT
VIDEO OUT.
the COMPONENT
VIDEO OUT.
4
Press the [SETUP] button.
The setup menu closes.
0.Video Input
------------------------
Component Video
a.DVD : IN1
b.VIDEO1 : ---
c.VIDEO2 : ---
d.VIDEO3 : ---
HDMI
e.DVD : No
f.VIDEO1 : No
g.VIDEO2 : No
h.VIDEO3 : No
------------------------
Component Video
a.DVD : IN1
b.VIDEO1 : ---
c.VIDEO2 : ---
d.VIDEO3 : ---
HDMI
e.DVD : No
f.VIDEO1 : No
g.VIDEO2 : No
h.VIDEO3 : No
SETUP