ONKYO TX-SR578 Manual Do Utilizador
46
En
Note
• When set to “On” and close the menu, the name of connected
p-compatible components and “RIHD On” are dis-
played on the AV receiver.
“Search…”
played on the AV receiver.
“Search…”
→ “(name)” → “RIHD On”
When the AV receiver cannot receive the name of the compo-
nent, it is displayed as “Player
nent, it is displayed as “Player
*
” or “Recorder
*
”, etc (“
*
” means
the number of two or more component).
When set to “Off” and close the menu, “RIHD Off” are dis-
played on the AV receiver.
“Disconnect”
When set to “Off” and close the menu, “RIHD Off” are dis-
played on the AV receiver.
“Disconnect”
→ “RIHD Off”
• When an
p-compatible component is connected to the
AV receiver via the HDMI cable, the name of the connected
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a
Blu-ray Disc/DVD player (being powered on) by the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player is displayed on the AV receiver.
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a
Blu-ray Disc/DVD player (being powered on) by the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player is displayed on the AV receiver.
• Set to
“
Off
”
when a connected piece of equipment is not com-
patible or it is unclear whether the equipment is compatible or
not.
not.
• If movement is unnatural when set to
“
On
”
, change the setting
to
“
Off
”
.
• Refer to the connected component’s instruction manual for
details.
■
Audio Return Channel
`
Off:
Select “Off” if you don’t want to use audio return
channel (ARC) function.
channel (ARC) function.
`
Auto:
The audio signal from your TV tuner can be sent to
the HDMI OUT of the AV receiver.
the HDMI OUT of the AV receiver.
Audio return channel (ARC) function enables an HDMI
1.4 capable TV to send the audio stream to the HDMI
OUT of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must support
ARC function.
1.4 capable TV to send the audio stream to the HDMI
OUT of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must support
ARC function.
Note
• The “Audio Return Channel” setting can be set only when the
“HDMI Control” setting is set to “On”.
• This setting is set to “Auto” automatically when the “HDMI
Control” is set to “On” first time.
■
Power Control
`
Off:
Power Control disabled.
`
On:
Power Control enabled.
To link the power functions of
p-compatible com-
ponents connected via HDMI, select “On”.
This setting is set to “On” automatically when the
“HDMI Control” is set to “On” first time.
This setting is set to “On” automatically when the
“HDMI Control” is set to “On” first time.
Note
• The
“Power Control”
setting can be set only when the
“
HDMI
Control
”
setting is set to “On”.
• HDMI power control only works with
p-compatible
components that support it and may not work properly with
some components due to their settings or compatibility.
some components due to their settings or compatibility.
• When set to “On”, power consumption will increase.
• When set to “On”, regardless of whether the AV receiver is On
• When set to “On”, regardless of whether the AV receiver is On
or in Standby, both audio and video stream from an HDMI input
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function). When the HDMI pass
through function activates in standby mode, HDMI THRU indi-
cator will light.
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function). When the HDMI pass
through function activates in standby mode, HDMI THRU indi-
cator will light.
• The power consumption during standby mode will increase dur-
ing the HDMI pass through function; however in the following
cases, the power consumption can be saved:
1. The TV is in standby mode.
2. You are watching a TV program.
cases, the power consumption can be saved:
1. The TV is in standby mode.
2. You are watching a TV program.
• Refer to the connected component’s instruction manual for
details.
■
TV Control
`
Off:
TV Control disabled.
`
On:
TV Control enabled.
Set to “On” when you want to control the AV receiver
from an
from an
p-compatible TV that is connected to
HDMI.
Note
• Do not assign the component connected with the HDMI input to
the TV/CD selector when you set “TV Control” setting to “On”.
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
• Set to
“
Off
”
when the TV is not compatible or when it is unclear
whether the TV is compatible or not.
• The
“TV Control”
setting can be set only when the
“
HDMI
Control
”
(
“Power Control”
settings are both set to
“On”.
• Refer to the connected component’s instruction manual for
details.
With this preference, you can protect your settings by
locking the setup menus.
locking the setup menus.
Main menu
Lock Setup
■
Setup
`
Locked:
Setup menus locked.
`
Unlocked:
Setup menus not locked.
When the setup menus are locked, you cannot change any
setting.
setting.
After changing the settings of the “HDMI Control”,
“Audio Return Channel”
“Audio Return Channel”
, “Power Control”, or “TV
Control”
, turn off the power to all connected pieces of
equipment and then turn them on again. Refer to the
user’s manuals for all connected pieces of equipment.
user’s manuals for all connected pieces of equipment.
Lock Setup