ONKYO TX-SR578 Manual Do Utilizador

En

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you 
can select a different source for each room.

There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an amp in Zone 2.

This setup allows 5.1-channel playback in your main room 
and 2-channel stereo playback in Zone 2, with a different 
source in each room. This is called Powered Zone 2, as the 
Zone 2 speakers are powered by the AV receiver. Note that 
when Powered Zone 2 is turned off, you can enjoy 7.1-
channel playback in your main room.

• With this setup, the Zone 2 volume is controlled by the AV 

receiver.

• Powered Zone 2 cannot be used if “Speakers Type” is set to 

“Bi-Amp” (

37).

This setup allows 7.1-channel playback in your main lis-
tening room and 2-channel stereo playback in Zone 2, 
with a different source in each room.

• The Zone 2 volume must be set on the Zone 2 amp.

50).

• Connect your Zone 2 speakers to the AV receiver’s FRONT 

HIGH OR ZONE 2 SPEAKERS L/R terminals.

Main room

TV

AV receiver

Zone 2

• Use an RCA audio cable to connect the AV receiver’s 

ZONE 2 LINE OUT L/R jacks to an analog audio input on 
your Zone 2 amp.

• Connect your Zone 2 speakers to the speaker terminals on 

your Zone 2 amp.

Main room

TV

Zone 2

AV receiver

Receiver/

integrated amp