ONKYO TX-SR578 Manual Do Utilizador

En

If you’ve connected your Zone 2 speakers to the AV 
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (

49), you must set the 

“Front High/Zone2” setting to “Zone2”.

• When “Zone2” is selected and Zone 2 turned on, the Zone 2 

speakers connected to the FRONT HIGH OR ZONE 2 
SPEAKERS terminals output sound, but the surround back or 
front high speakers connected to the SURR BACK OR 
FRONT HIGH SPEAKERS terminals do not. When “Zone2” 
is selected and Zone 2 turned off, the surround back or front high 
speakers output sound as normal.

• When the “Front High/Zone2” setting is set to “Zone2” and the 

input selector of Zone 2 is selected, power consumption on 
standby mode slightly increases.

• Powered Zone 2 cannot be used if “Speakers Type” is set to 

“Bi-Amp” (

This section explains how to turn Zone 2 on and off, how 
to select an input source for Zone 2, and how to adjust the 
volume for Zone 2.

• While Powered Zone 2 is being used, listening modes that 

require surround back and front high speakers (6.1/7.1), such as 
Dolby Digital EX, DTS-ES, and Dolby Pro Logic IIz Height are 
unavailable.

• When  the  “Front High/Zone2” setting is set to “Zone2” and the 

input selector of Zone 2 is selected, power consumption on 
standby mode slightly increases.

1

2

q/w to select “Front High/Zone2” and e/r to 

`

Zone2: 

Zone 2 speakers can be used (Powered Zone 2 
enabled).

1

Zone 2 turns on, the ZONE 2 indicator lights.

To select AM or FM, press the TUNER input selec-
tor button repeatedly. 
(North American models) You can also select SIR-
IUS.

To select the same source as that of the main room, 
press ZONE 2 repeatedly until “Z2 Selector: 
Source” appears on the display.

• You cannot select different AM or FM radio stations for 

your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.

2

ZONE 2 indicator

Input selector buttons