ONKYO TX-SR703E Manual Do Utilizador
47
First Time Setup
—Continued
You must specify the TV system used in your area.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
area. Note that when this setting is changed, all radio
presets are deleted.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
TV Format Setup
(not North American models)
(not North American models)
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “8. Hardware
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “TV Format,”
and then use the Left and Right
[
and then use the Left and Right
[
]/[
] buttons to select:
Auto:
Select this to automatically
detect the TV system from the
video input signals.
detect the TV system from the
video input signals.
NTSC:
Select if the TV system in
your area is NTSC.
your area is NTSC.
PAL:
Select if the TV system in
your area is PAL.
your area is PAL.
4
Press the [SETUP] button.
Setup closes.
RECEIVER
ENTER
ENTER
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step: 9kHz
d.Remote ID :1
------------------------
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step: 9kHz
d.Remote ID :1
b.TV Format :Auto
ENTER
ENTER
AM Frequency Step Setup
(on some models)
(on some models)
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “8. Hardware
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “AM Freq.
Step,” and then use the Left and
Right [
Step,” and then use the Left and
Right [
]/[
] buttons to select:
10 kHz:
Select if 10 kHz steps are
used in your area.
used in your area.
9 kHz:
Select if 9 kHz steps are used
in your area.
in your area.
4
Press the [SETUP] button.
Setup closes.
RECEIVER
ENTER
ENTER
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step:10kHz
d.Remote ID :1
------------------------
a.PoweredZone2:NotAct
b.TV Format :Auto
c.AM Freq. Step:10kHz
d.Remote ID :1
c.AM Freq. Step: 9kHz
ENTER
ENTER
TX-SR803_En.book Page 47 Friday, August 26, 2005 9:26 AM