ONKYO TX-SR703E Manual Do Utilizador

 

82

 

With the Zone 2 function, you can enjoy one input 
source in the main room and a different input source in 
another room.

 

1) Use an amp (receiver or integrated amp) in Zone 2 and 
connect your Zone 2 speakers to it. 
2) Connect your Zone 2 speakers to this AV receiver.

 

With this hookup, you can enjoy 7.1-channel playback in 
the main room and a different stereo source in Zone 2. 
The volume for Zone 2 is set on the other amp.

 

• Use an RCA audio cable to connect the AV receiver’s 

ZONE 2 LINE OUT L/R jacks to an analog audio 
input on the amp in Zone 2.

• Connect the Zone 2 speakers to the speaker terminals 

on the amp in Zone 2.

 

With this hookup, you can enjoy 5.1-channel playback in 
the main room and a different stereo source in Zone 2. 
The volume for Zone 2 is set on this AV receiver.

 

• Connect your Zone 2 speakers to the AV receiver’s 

ZONE 2 SPEAKERS terminals.

 

When Zone 2 is turned on, the ZONE 2 12V TRIGGER 
OUT goes high (+12 volts, 100 milliamperes max). Con-
necting this jack to a 12-volt trigger input on a compo-
nent in Zone 2 will turn that component on or off when 
Zone 2 is turned on or off on this AV receiver.

TV

Receiver/

integrated amp

AV receiver

You don’t need to make any settings to use this hookup. 
Proceed to “Using Zone 2” on page 83.

TV

AV receiver

You must set the “Powered Zone 2” setting to “Act” 
(Activated) in order to use this hookup (see page 83).

TX-SR803_En.book Page 82 Friday, August 26, 2005 9:26 AM