Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR577
  5. Guia Do Utilizador

ONKYO TX-SR577 Guia Do Utilizador

Download
Página de 100
42
If you connect a video component to a COMPONENT 
VIDEO IN, you must assign that input to an input 
selector. For example, if you connect your DVD player 
to COMPONENT VIDEO IN 2, you must assign 
COMPONENT VIDEO IN 2 to the DVD/BD input 
selector.
Notes:
• If you connect an input component (such as UP-A1 
series Dock that seated iPod) to the UNIVERSAL 
PORT jack, you cannot assign any input to PORT 
selector.
• This procedure can also be performed on the AV 
receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.
Component Video Input Setup
Input selector
 Default assignment
DVD/BD
IN1
VCR/DVR
- - - - -
CBL/SAT
IN2
AUX
- - - - -
TV/TAPE
- - - - -
TUNER
- - - - -  (Fixed)
CD
- - - - -
PORT
- - - - -
1
Press the [RECEIVER] button, 
followed by the [SETUP] button.
2
Use the Up and Down [
q]/[w] 
buttons to select “1.Input 
Assign”, and then press 
[ENTER].
3
Use the Up and Down [
q]/[w] 
buttons to select 
“1-2.Component”, and then 
press [ENTER].
4
Use the Up and Down [
q]/[w] 
buttons to select an input 
selector, and use the Left and 
Right [
e]/[r] buttons to select:
IN1:  Select if the video component 
is connected to 
COMPONENT VIDEO IN 1.
IN2:  Select if the video component 
is connected to 
COMPONENT VIDEO IN 2.
- - - - -: Select if you’re not using the 
COMPONENT VIDEO 
OUT.
5
Press the [SETUP] button.
Setup closes.