ONKYO TX-SR876 Manual Do Utilizador

Página de 150
56
Notes:
• See page 35 for charts showing how the “Monitor 
Out” and “Resolution” settings affect the video signal 
flow through the AV receiver.
• This procedure can also be performed on the AV 
receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.
HDMI Input Setup 
If you connect a video component to an HDMI IN, you 
must assign that input to an input selector. For example, 
if you connect your DVD player to HDMI IN 1, you 
must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned.
If you’ve connected your TV to the AV receiver with an 
HDMI cable, you can set the AV receiver so that com-
posite video, S-Video, and component video sources are 
upconverted
*
 and output by the HDMI outputs. You can 
set this for each input selector by selecting the “- - -” 
option.
5
Use the Up and Down [
q]/[w] but-
tons to select “Resolution”, and 
use the Left and Right [
e]/[r
buttons to select:
Through:
Select this to pass video through the 
AV receiver at the same resolution 
and with no conversion.
Auto:
Select this to have the AV receiver 
automatically convert video at reso-
lutions not supported by your TV. 
(Not available when the “Monitor 
Out” setting is set to “Analog”.)
480p:
Select this for 480p output and 
video conversion as necessary.
720p:
Select this for 720p output and 
video conversion as necessary.
1080i:
Select this for 1080i output and 
video conversion as necessary.
1080p:
Select this for 1080p output and 
video conversion as necessary. (Not 
available when the “Monitor Out” 
setting is set to “Analog”.)
Source:
Output will be according to the res-
olution level which was set with 
Resolution inside Source: 
4-4. Picture Adjust. (Setting for 
each Source becomes possible.)
6
Press the [SETUP] button.
Setup closes.
Video Input Setup
1
Press the [RECEIVER] button, 
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.
2
Use the Up and Down [
q]/[w] but-
tons to select “1. Input/Output 
Assign”, and then press 
[ENTER].
The “Input/Output Assign” menu 
appears.
IN
OUT
Composite video, S-Video, 
component video
Composite video, S-Video, 
component video
HDMI
HDMI
1. Input/Output 
Assign
1. Monitor 
Out
2. HDMI 
Input
3. Component 
Video 
Input
4.  Digital Audio Input
5.  Analog Audio Input