ONKYO TX-SR876 Manual Do Utilizador

58

If you connect a video component to a COMPONENT 
VIDEO IN, you must assign that input to an input 
selector. For example, if you connect your DVD player 
to COMPONENT VIDEO IN 3, you must assign COM-
PONENT VIDEO IN 3 to the DVD input selector.

By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors are assigned to the “- - -” option.

If you’ve connected your TV to the AV receiver with a 
component video cable, you can set the AV receiver so 
that composite video and S-Video sources are upcon-
verted* and output by the COMPONENT VIDEO MON-
ITOR OUT. You can set this for each input selector by 
selecting the “- - -” option.

Notes:
• For composite video and S-Video upconversion for 

the COMPONENT VIDEO MONITOR OUT, the 
“Monitor Out” setting must be set to “Analog” (see 
page 55), and the “Component Video Input” setting 
must be set to “- - -”. See page 35 for more informa-
tion on video signal flow and upconversion.

• This procedure can also be performed on the AV 

receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

DVD

IN1

VCR/DVR

- - -

CBL/SAT

- - -

GAME/TV

- - -

AUX1

- - -

AUX2

- - -

TAPE

- - -

TUNER

- - - (Fixed)

CD

- - -

PHONO

- - -

Press the [RECEIVER] button, 
followed by the [SETUP] button.
The main menu appears onscreen.

If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

Composite video, S-Video

Composite video, S-Video

Component video

Component video

q]/[w] but-

tons to select “1. Input/Output 
Assign”, and then press 
[ENTER].
The “Input/Output Assign” menu 
appears.

q]/[w] but-

tons to select “3. Component 
Video Input”, and then press 
[ENTER].
The “Component Video Input” menu 
appears.

q]/[w] but-

e]/[r] buttons to select:

IN1:  Use the video component 

connected to COMPONENT 
VIDEO IN 1.

IN2:  Use the video component 

connected to COMPONENT 
VIDEO IN 2.

IN3:  Use the video component 

connected to COMPONENT 
VIDEO IN 3.

- - -:  Output composite video and 

S-Video sources from the 
COMPONENT VIDEO 
MONITOR OUT.

Press the [SETUP] button.
Setup closes.