ONKYO TX-SR875 Manual Do Utilizador

102

Zone 2 and Zone 3

—Continued

Zone 2 Video Output (TX-SR875 only)

The TX-SR875 features a composite video output for
connection to a TV in Zone 2, so you can enjoy both
audio and video in that zone.

Hookup

• Use a composite video cable to connect the AV

receiver’s ZONE 2 OUT V jack to a composite video
input on your Zone 2 TV.

Note:

• The ZONE 2 OUT V jack outputs video from compo-

nents connected to composite video inputs and
S-Video inputs.

Zone 2 12V Trigger

When Zone 2 is turned on, the output from the ZONE 2
12V TRIGGER OUT goes high (+12 volts, 100 milliam-
peres max). Connecting this jack to a 12-volt trigger
input on a component in Zone 2 will make that compo-
nent turn on or off as and when Zone 2 is turned on or off
on the AV receiver.

Zone 3 speakers must be connected to an amp in Zone 3.

Connecting Your Zone 3 Speakers

You can enjoy 2-channel stereo playback in Zone 3 and
a different source to those selected for your main room
and Zone 2.

Hookup

• Use an RCA audio cable to connect the AV receiver’s

ZONE 3 PRE OUT L/R jacks to an analog audio input
on your Zone 3 amp.

• Connect your Zone 3 speakers to the speaker termi-

nals on your Zone 3 amp.

Note:

• With the default settings, the Zone 3 volume must be

set on the Zone 3 amp. If your Zone 3 amp has no vol-
ume control, set the Zone 3 Out setting to Variable so
that you can set the Zone 3 volume on the AV receiver
(see page 104).

ZONE 2

OUT

Main room

Zone 2

AV receiver

Connecting Zone 3

ZONE 2

ZONE 3

PRE OUT

Main room

Zone 3

Receiver/

integrated amp

AV receiver

TX-SR805_875_En.book Page 102 Thursday, April 26, 2007 3:00 PM