ONKYO TX-SR875 Manual Do Utilizador
103
Zone 2 and Zone 3
—Continued
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2
Speakers Directly to the AV receiver” on page 101, you
must set the Powered Zone 2 setting to Act (Activated).
receiver, as explained in “Connecting Your Zone 2
Speakers Directly to the AV receiver” on page 101, you
must set the Powered Zone 2 setting to Act (Activated).
Notes:
• When Act is selected and Zone 2 turned on, the Zone 2
speakers connected to the ZONE 2 L/R speaker termi-
nals output sound, but the surround back speakers con-
nected to the SURR BACK L/R speaker terminals do
not. When Act is selected and Zone 2 turned off, the
surround back speakers output sound as normal.
nals output sound, but the surround back speakers con-
nected to the SURR BACK L/R speaker terminals do
not. When Act is selected and Zone 2 turned off, the
surround back speakers output sound as normal.
• On the TX-SR875, Powered Zone 2 cannot be used if
the Speaker Type is set to Bi-Amp or BTL (page 45).
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
buttons.
Powered Zone 2 Setting
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “7. Hardware
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
INPUT SELECTOR
ON
STANDBY
DISPLAY
MUTING
GU
IDE
EXI
T
PREV
CH
DIMMER
CDR/MD
SAT
TAPE/AMP
SLEEP
MACRO
REMOTE MODE
--/--- 10
11
12
TV
TV CH
TV VOL
PLAYLIST
RANDOM
DVD
AUX
1
AUX
2
GAME/TV
CBL/SAT
VCR/DVR
D. TUN
CD
TUNER
TAPE
PHONO
REC
ENTER
TO
P M
ENU
MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE
DOCK
DVD
RECEIVER
CD
+
-
1
2
3
ZONE
3
ZONE
2
INPUT
+
-
+10
0
CLEAR
1
2
3
4
5
6
7
8
9
SE
TUP
RET
UR
N
SETUP
RECEIVER
ENTER
RECEIVER
SE
TUP
ENTER
ENTER
3
Use the Up and Down [
]/[
]
buttons to select “2. Zone 2/
Zone 3,” and then press [ENTER].
Zone 3,” and then press [ENTER].
The Zone 2/Zone 3 screen appears.
4
Use the Up and Down [
]/[
]
buttons to select “Powered
Zone 2,” and use the Left and
Right [
Zone 2,” and use the Left and
Right [
]/[
] buttons to select:
Not Act:
ZONE 2 L/R speaker termi-
nals not activated (Powered
Zone 2 disabled).
Zone 2 disabled).
Act:
ZONE 2 L/R speaker termi-
nals activated (Powered Zone
2 enabled).
2 enabled).
5
Press the [SETUP] button.
Setup closes.
ENTER
ENTER
7-2.Zone2/Zone3
Powered Zone2 Not Act
Zone2 Out Fixed
Zone3 Out Fixed
Zone2 Out Fixed
Zone3 Out Fixed
ENTER
ENTER
SE
TUP
TX-SR805_875_En.book Page 103 Thursday, April 26, 2007 3:00 PM