ONKYO HT-R390 Manual Do Utilizador

En

You can change various audio settings from the Home 
menu (

page 24).

• These settings are disabled when:

– a pair of headphones is connected, or
– the  “Audio TV Out” setting is set to “On” (

page 35) and 

an input selector other than HDMI is selected, or

– “HDMI Ctrl (RIHD)” is set to “On” (

page 34) and 

you’re listening through your TV speakers.

■

`

–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output 
from the front speakers.

■

`

–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output 
from the front speakers.

You can adjust the bass and treble for Speakers A and B 
front speakers, except when the Direct listening mode is 
selected.

• To bypass the bass and treble tone circuits, select the Direct 

listening mode.

■

`

–15 dB to 0 dB to +12 dB in 1 dB steps

Default setting: 0 dB (excluding European models), 
+3 dB (European models)

■

`

–12 dB to 0 dB to +12 dB in 1 dB steps

You can adjust the volume of each speaker while listening 
to an input source.
These temporary adjustments are cancelled when the AV 
receiver is set to Standby. To save the setting you made 
here, go to “Level Cal (Level Calibration)” (

page 30) 

before setting the AV receiver to Standby.

• You cannot use this function while the AV receiver is muted.
• Speakers that are set to “No” or “None” in the “Sp Config 

(Speaker Configuration)” (

page 29) cannot be adjusted.

■

`

`

EX.BASS is a technology that have developed by experi-
ments and listening tests to reproduce a natural deeper 
bass. When you turn the mode on, you can get dynamic 
and deeper presence on your movies and music.

• EX.BASS is disabled when:

– Direct listening mode is selected, or
– Speakers B is on, or
– Speakers A is off, or
– a pair of headphones is connected.

■

See “Dynamic EQ” of “Source Setup” (

page 32).

■

See “Dynamic Volume” of “Source Setup” (

page 32).

• These technologies can be used when:

– Speakers A is selected and,
– Speakers B is not selected and,
– Any listening mode other than Direct is selected and,
– A pair of headphones is not connected.

• The setting is stored individually for each input selector.

■

For Dolby Digital and Dolby Digital Plus sources, the 
options are:

`

`

Low:

Small reduction in dynamic range.

`

High:

Large reduction in dynamic range.

For Dolby TrueHD sources, the options are:

`

Auto:

The Late Night function is set to “On” or “Off” 
automatically.

`

`

Turn this setting on to reduce the dynamic range of Dolby 
Digital material so that you can still hear quiet parts even 
when listening at low volume levels—ideal for watching 
movies late at night when you don’t want to disturb 
anyone.

q/w and ENTER to select “Audio”, and then 

q/w/e/r to make the desired selection.