ONKYO DTR-7.9 Manual Do Utilizador

118

This section explains how to turn Zone 2 on and off, how 
to select an input source for Zone 2, and how to adjust 
the volume for Zone 2.

Note:
While Powered Zone 2 is being used, listening modes 
that require surround back speakers (6.1/7.1), such as 
Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema, 
are unavailable.

Note:
To control Zone 2, you must press the remote control-
ler’s [Zone 2] button first.

Zone 2 turns on, the Zone 2 indicator 
lights up.

To select AM or FM press the [Tuner] 
input selector button repeatedly. On the 
North American model, you can also 
select XM or SIRIUS.

To select the same source as that of the 
main room, press the [Zone 2] button 
repeatedly until “Z2 Selector: Source” 
appears on the display.

Note:
You cannot select different AM or FM 
radio stations for your main room and 
Zone 2. The same AM/FM radio station 
will be heard in each room.

Press the [Zone 2] button, then 
point the remote controller at the 
AV receiver and press the [On/
Standby] button.
Zone 2 turns on, the Zone 2 indicator 
lights up.

To select an input source for 
Zone 2, press the [Zone 2] but-
ton, followed by an Input Selector 
button.
To select AM or FM press the [Tuner] 
Input Selector button repeatedly. On the 
North American model, you can also 
select XM or SIRIUS.

Note:
You cannot select different AM or FM 
radio stations for your main room and 
Zone 2. The same AM/FM radio station 
will be heard in each room.