ONKYO HT-RC430 Manual Do Utilizador

If you connect a video component to an HDMI input, you 
must assign that input to an input selector. For example, if 
you connect your Blu-ray Disc/DVD player to HDMI IN 2, 
you must assign “HDMI2” to the “BD/DVD” input 
selector.
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD

`

HDMI1, HDMI2, HDMI3, HDMI4:

Select the input to which the component has been 
connected.

`

- - - - -:

Select if you’re not using the HDMI OUT.

Each HDMI input cannot be assigned to two input 
selectors or more. When HDMI1 - HDMI4 have already 
been assigned, you must first set any unused input 
selectors to “- - - - -” or you will be unable to assign 
HDMI1 - HDMI4 to input selector.

• If no video component is connected to HDMI output (even if the 

HDMI input is assigned), the AV receiver selects the video 
source based on the setting of “Component (Component Video 
Input)”.

• When an HDMI IN is assigned to an input selector as explained 

here, the same HDMI IN will be set as a priority in the “Digital 
Audio (Digital Audio Input)” (

). In this case, if you 

want to use the coaxial or optical audio input, make the 
appropriate selection in the “Audio Selector” setting 
(

• Do not assign an HDMI IN to the TV/CD selector while “HDMI 

Ctrl (RIHD)” is set to “On” (

), otherwise 

appropriate CEC (Consumer Electronics Control) operation will 
not be guaranteed.

• If you assign “- - - - -” to an input selector that is currently 

selected in “HDMI Through” (

), the “HDMI 

Through” setting will be automatically switched to “Off”.

• The  “TUNER” selector cannot be assigned and is fixed at the 

“- - - - -” option.

If you connect a video component to a component video 
input, you must assign that input to an input selector. For 
example, if you connect your Blu-ray Disc/DVD player to 
COMPONENT VIDEO IN 2, you must assign “IN2” to 
the “BD/DVD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD

`

IN1, IN2:

Select the input to which the component has been 
connected.

`

- - - - -:

Select if you’re not using the COMPONENT 
VIDEO OUT.

• The  “TUNER” selector cannot be assigned and is fixed at the 

“- - - - -” option.