ONKYO HT-RC430 Manual Do Utilizador

• For a more accurate setting, look up the frequency response in the 

manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound 

from your subwoofer.

■

`

On 

`

Off 

Turn this setting on to boost bass output by feeding bass 
sounds from the front left, right, and center channels to the 
subwoofer. 

• When  the  “Subwoofer” setting is set to “No” or the “Front” 

setting to “Small” (

), this setting is fixed to “Off”.

• This setting is set to “On” automatically when the “Subwoofer” 

and “Front” settings are set for the first time to “Yes” and 
“Large” respectively.

Here you can specify the distance from each speaker to the 
listening position so that the sound from each speaker 
arrives at the listener’s ears as the sound designer intended.

• These settings are not available in either of the following cases:

– A pair of headphones is connected.
– The  “Audio TV Out” setting is set to “On” (

– “HDMI Ctrl (RIHD)” is set to “On” (

) and you’re 

listening through your TV speakers.

– Speakers B is on.
– Speakers A is off.

■

`

feet: 

Distances can be set in feet. Range: 1ft to 30ft in 
1 foot steps.

`

meters:

Distances can be set in meters. Range: 0.3m to 9.0m 
in 0.3 meter steps.

■

`

Specify the distance from the each speaker to your 
listening position.

• Speakers that you set to “No” or “None” in the “Sp Config 

) cannot be selected.

Here you can adjust the level of each speaker with the 
built-in test tone so that the volume of each speaker is the 
same at the listening position.

• These settings cannot be calibrated in either of the following 

cases:
– A pair of headphones is connected.
– The  “Audio TV Out” setting is set to “On” (

).

– “HDMI Ctrl (RIHD)” is set to “On” (

) and you’re 

listening through your TV speakers.

– Speakers B is on.
– Speakers A is off.
– The AV receiver is muted.

■

`

–12 dB to 0 dB to +12 dB in 1 dB step.

■

`

–15 dB to 0 dB to +12 dB in 1 dB step.

• Speakers that you set to “No” or “None” in the “Sp Config 

) cannot be selected.

*1

For the center speaker and subwoofer, the level settings made 
by using the Home menu are saved in this menu (

• If you’re using a handheld sound level meter, adjust the level of 

each speaker so that it reads 75 dB SPL at the listening position, 
measured with C-weighting and slow reading.