ONKYO HT-R990 Manual Do Utilizador

En

Controlling Other Components

With the UP-A1 Dock, you can easily play the music, 
photos, or movies stored on your Apple iPod/iPhone 
through the AV receiver and enjoy great sound.
You can use the AV receiver’s remote controller to 
operate your iPod/iPhone.

■

Auto Power On
If you start iPod/iPhone playback while the AV receiver 
is on standby, the AV receiver will automatically turn 
on and select your iPod/iPhone as the input source.

Direct Change
If you start iPod/iPhone playback while listening to 
another input source, the AV receiver will automatically 
select your iPod/iPhone as the input source.

Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to 
control basic iPod/iPhone functions (

■

You can use the Alarm Clock function of your 
iPod/iPhone to automatically turn on your iPod/iPhone 
and the AV receiver at a specified time. The AV receiver’s 
input source will automatically be set to the PORT 
selector.

• To use this function, your iPod/iPhone must be in the UP-A1 

Dock, and the UP-A1 Dock must be connected to the AV 
receiver.

• This function works only in Standard mode (

• When you use this function, be sure to set the AV receiver’s 

volume control to a suitable level.

• When Zone 2 is turned on, you can’t use this function.
• This function doesn’t work when alarms sounds are set on your 

iPod/iPhone.

• The  “Charge Mode” setting must be set to “On” to enable the 

Alarm Clock function (

■

When the UP-A1 Dock with docked iPod/iPhone is 
connected to the AV receiver, the battery of your 
iPod/iPhone is charged. Charging occurs when AV 
receiver is set to on or standby.
You can specify how the power is fed to your iPod/iPhone 
when the AV receiver is in standby mode (

page 52).

• When the UP-A1 Dock with docked iPod/iPhone is connected, 

the power consumption on standby mode slightly increases.

The Dock is sold separately. Models sold are different 
depending on the region.
For the latest information on the Onkyo Dock 
components, see the Onkyo web site at: 
http://www.onkyo.com
Before using the Onkyo Dock components, update 
your iPod/iPhone with the latest software, available 
from the Apple web site.
For supported iPod/iPhone models, see the 
instruction manual of the Onkyo Dock.

The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first 
song.

■

• Functionality depends on your iPod/iPhone model and 

generation.

• Before selecting a different input source, stop your 

iPod/iPhone playback to prevent the AV receiver from 
selecting the iPod/iPhone input source by mistake.

• If any accessories are connected to your iPod/iPhone, the AV 

receiver may not be able to select the input source properly.

• When connecting the UP-A1 Dock to the radio tuner UP-HT1 

(North American models)/UP-DT1 (European models) 
with AUTO selected by the tuner’s Mode Selector switch, you 
can switch the input source between UP-A1 Dock and the 
tuner, by pressing PORT repeatedly on the front panel.

• While your iPod/iPhone is in the UP-A1 Dock, its volume 

control has no effect. If you adjust your iPod/iPhone models 
volume control while it’s in the UP-A1 Dock, make sure it’s 
not set too high before you reconnect your headphones.

• The Auto Power On function will not work if you set your 

iPod/iPhone in the UP-A1 Dock while it is playing.

• When Zone 2 is turned on, you can’t use Auto Power On and 

Direct Change functions.

• The  “Charge Mode” setting must be set to “On” to enable the 

Auto Power On and Direct Change functions (

page 52).