ONKYO HT-RC440 Manual Do Utilizador

If you connect a component to a digital audio input, you 
must assign that input to an input selector. For example, if 
you connect your CD player to the OPTICAL IN 1, you 
must assign “OPTICAL1” to the “TV/CD” input selector. 
Here are the default assignments.

■

BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD

`

COAXIAL1, COAXIAL2, OPTICAL1, 
OPTICAL2:

Select the input to which the component has been 
connected.

`

- - - - -:

Select if the component is connected to an analog 
audio input.

• When  an  HDMI IN is assigned to an input selector in 

“HDMI Input” (

), the same HDMI IN will be set as 

a priority in this assignment. In this case, if you want to use the 
coaxial or optical audio input, make the appropriate selection in 
the “Audio Selector” (

).

• Available sampling rate for PCM signals (stereo/mono) from a 

digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16, 
20, 24 bit.

This section explains how to specify which speakers are 
connected and their sizes.

For speakers with a cone diameter larger than 6-1/2 inches 
(16 cm), specify Large (full band). For those with a 
smaller diameter, specify Small (default crossover 100Hz).
The crossover frequency can be changed in “Crossover 
(Crossover Frequency)”.

• These settings are not available in either of the following cases:

– A pair of headphones is connected.
– The  “Audio TV Out” setting is set to “On” (

– “HDMI Ctrl (RIHD)” is set to “On” (

) and you’re 

listening through your TV speakers.

■

`

`

■

`

Small:

`

Large:

Select based on the cone diameter.

• If the “Subwoofer” setting is set to “No”, this setting is fixed to 

“Large”.

■

`

Small:

`

Large:

Select based on the cone diameter.

`

*1

If the “Front” setting is set to “Small”, the “Large” option 
cannot be selected.

■

Crossover (Crossover Frequency)
This setting is advantageous for the speakers that you 
specified as “Small” in 

. To get the best bass performance from 

your speaker system, you need to set the crossover 
frequency according to the size and frequency response 
of your speakers.

`

40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 
120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your system 
when choosing the crossover frequency.

*

Choose the setting matching your speaker.

“Setup”

“Setup”

Cone diameter

Over 8 in. (20 cm)

40/50/60 Hz

*

6-1/2 to 8 in. (16 to 20 cm)

70/80/90 Hz

*

5-1/4 to 6-1/2 in. (13 to 16 cm)

100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm)

120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

*