Pioneer VSX-709RDS Manual Do Utilizador

En

This illustration shows the VSX-709RDS model.

1

— OFF/ _ ON (Main power) button

If the button is OFF (

—), the power of the

receiver is shut off and the STANDBY/ON button
(3) on the receiver or the remote control do not
function.  Pressing the button again will turn the
receiver ON (

_) and the receiver enters the

standby mode.  In the standby mode, you can
turn on the receiver using the STANDBY/ON
button (3) on the receiver or the remote control.

2 STANDBY indicator

Lights when the receiver is in standby mode
(note that the receiver consumes a small amount
of power (1 W) in standby mode).

3

Switches the receiver between on and standby
(note that the receiver consumes a small amount
of power (1 W) in standby mode).

4 TUNING SELECT button

Switches between station memory and
frequency select modes.

Selects station memories when using the tuner.

Selects the frequency when using the tuner.

5 CLASS button (see pages 44 – 46)

Switches between the three banks (classes) of
station memories.

6 MEMORY button (see page 45)

Press to memorize a station for recall using the
STATION (+/–) buttons.

7 RF ATT button (see p. 42)

Use to lower the input level of a radio signal that
is too powerful or contain interference thus
causing the receiver to distort

8 CHARACTER/SEARCH button

Use to search for different program types in RDS
mode. It is also used to input station names.

9  DIRECT button

Use to switch Direct playback on or off. This
mode bypasses the tone controls and channel
levels for the most accurate reproduction of a
program source.

0 BASS  (+/–) buttons

Use to increase/decrease bass (within a range of
– 6 dB to 6 dB in 2 dB steps).

- Display (see page 34)

= TREBLE (+/–) buttons

Use to increase/decrease treble (within a range of
– 6 dB to 6 dB in 2 dB steps).