ONKYO T-4355 Manual Do Utilizador

14

If you’re using the T-4355 together with the 
A-9355/A-9155 Onkyo amplifier, press the remote con-
troller’s [ON] button to turn on the T-4355 and 
A-9355/A-9155. (Plug the T-4355 power cord into the 
A-9355/A-9155 AC OUTLET.)

The T-4355 uses a battery-less memory backup system 
in order to retain radio presets and other settings when 
it’s unplugged or in the case of a power failure. 

Backup data can be stored incorrectly or destructed, and 
lead to a malfunction if either of the following opera-
tions is performed: 

• turning off the power immediately after an operation. 
• repeating the fast power on/off switchings.
When a malfunction occurred due to those operations, 
initialize T-4355 to its factory defaults. Radio presets 
and other settings are deleted.

To initialize T-4355, press the [DISPLAY] button while 
holding down the [FM MODE] button.

When the power is turned off while the Auto Preset is 
running, T-4355 is initialized to its factory defaults.

Press the T-4355’s [POWER] 
switch.
The T-4355 turns on.

To turn off the T-4355, press the 
[POWER] switch.

Use the [BAND] button to select 
FM or AM.
The band switches between FM and 
AM each time you press the button.

to tune into a station.
The tuning frequency is shown on the 
display.

For each button press, the frequency 
will change in 0.05 MHz steps for FM, 
and 9 kHz steps for AM.

If you hold down the button for more 
than 0.5 second, the T-4355 will find 
the next station automatically.