Справочник Пользователя для ONKYO T-4355
14
Turning On the T-4355
Using the A-9355/A-9155’s Remote
Controller
Controller
If you’re using the T-4355 together with the
A-9355/A-9155 Onkyo amplifier, press the remote con-
troller’s [ON] button to turn on the T-4355 and
A-9355/A-9155. (Plug the T-4355 power cord into the
A-9355/A-9155 AC OUTLET.)
A-9355/A-9155 Onkyo amplifier, press the remote con-
troller’s [ON] button to turn on the T-4355 and
A-9355/A-9155. (Plug the T-4355 power cord into the
A-9355/A-9155 AC OUTLET.)
Memory backup
The T-4355 uses a battery-less memory backup system
in order to retain radio presets and other settings when
it’s unplugged or in the case of a power failure.
in order to retain radio presets and other settings when
it’s unplugged or in the case of a power failure.
Backup data can be stored incorrectly or destructed, and
lead to a malfunction if either of the following opera-
tions is performed:
lead to a malfunction if either of the following opera-
tions is performed:
• turning off the power immediately after an operation.
• repeating the fast power on/off switchings.
When a malfunction occurred due to those operations,
initialize T-4355 to its factory defaults. Radio presets
and other settings are deleted.
• repeating the fast power on/off switchings.
When a malfunction occurred due to those operations,
initialize T-4355 to its factory defaults. Radio presets
and other settings are deleted.
To initialize T-4355, press the [DISPLAY] button while
holding down the [FM MODE] button.
holding down the [FM MODE] button.
When the power is turned off while the Auto Preset is
running, T-4355 is initialized to its factory defaults.
running, T-4355 is initialized to its factory defaults.
Listening to the Radio
1
Plug the power cord into a suit-
able wall outlet (or the AC OUT-
LET on the A-9355/A-9155’s rear
panel).
able wall outlet (or the AC OUT-
LET on the A-9355/A-9155’s rear
panel).
2
Press the T-4355’s [POWER]
switch.
The T-4355 turns on.
switch.
The T-4355 turns on.
To turn off the T-4355, press the
[POWER] switch.
[POWER] switch.
POWER
ON
RC-627S (remote controller supplied
with the A-9355/A-9155)
with the A-9355/A-9155)
Tuning into Radio Stations Manually
1
Use the [BAND] button to select
FM or AM.
The band switches between FM and
AM each time you press the button.
FM or AM.
The band switches between FM and
AM each time you press the button.
2
Use the TUNING [
]/[
] buttons
to tune into a station.
The tuning frequency is shown on the
display.
The tuning frequency is shown on the
display.
For each button press, the frequency
will change in 0.05 MHz steps for FM,
and 9 kHz steps for AM.
will change in 0.05 MHz steps for FM,
and 9 kHz steps for AM.
If you hold down the button for more
than 0.5 second, the T-4355 will find
the next station automatically.
than 0.5 second, the T-4355 will find
the next station automatically.
TUNING
BAND