Rocketfish RF-WHTIB Manual Do Utilizador

14

The volume control on the receiver is only used to adjust the balance 
of the volume between the front and rear speakers. After the system 
is set up, we recommend that you adjust the volume balance one 
time.

Turn on the sender and receiver, then turn on the amplifier and adjust it 

to your normal listening level.

Adjust the volume on the receiver, using the volume control knob, to 

balance the front and rear speakers. 
After the volume of the receiver is set up, always adjust the volume using 
the volume control on your amplifier whenever needed.

Press and hold the 

 (power) button on the sender for two seconds. The 

LED indicator will blink quickly first and then go off to indicate that the 

sender is turned off.

Press and hold the 

 (power) button on the receiver for two seconds. 

The LED indicator will blink quickly first and then go off to indicate that 

the receiver is turned off.

The RocketFish Universal Wireless Rear Speaker Kit uses 
state-of-the-art 2.4 GHz technology to digitally send audio data from 
the sender to the receiver.   Wireless links create a small latency 
between the sender and receiver, and many A/V receivers let you 
adjust the delay between the various speakers in your surround 
system.  To optimize your system when tuning your speaker setup, 
we suggest that you shorten the delay to the rear speakers by 
15-20 ms.