Kenwood KMR-550U Manual Do Utilizador

|

KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U

English

   

|

   

This unit is factory-set to operate in the 

Demonstration mode initially. 

When using this unit for the first time, cancel 

the Demonstration mode. Refer to 

in Quick Start 

Guide.

2

•  Stop the car before operating the unit.
•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) inside 

the unit.

¤

•  Adjust the volume so that you can hear the sound 

outside the car. Driving with the volume too high 

may cause an accident.

•  Wipe off the dirt on the panel with a dry silicon or 

soft cloth. 

Failure to observe this precaution may result in 

damage to the monitor or unit.

The unit may not function properly if the connectors 

between the unit and faceplate are dirty. Detach the 

faceplate and clean the connector with a cotton swab 

gently, being careful not to damage the connector.

When the car is air-conditioned, moisture may collect 

on the laser lens. This may cause disc read errors. In 

this case, remove the disc and wait for the moisture 

to evaporate.

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they can 

work with your model and in your area.

•  Characters that conform to ISO 8859-1 can be 

displayed.

•  The illustrations of the display and panel appearing 

in this manual are examples used to explain more 

clearly how the controls are used. Therefore, what 

appears on the display in the illustrations may differ 

from what appears on the display on the actual 

equipment, and some of the images on the display 

may be inapplicable.

•  This unit can only play the CDs with 

.

•  The following discs cannot be used:

 - A discs that is not round

 - A discs with coloring on the recording surface or a 

disc that is dirty

 - A recordable/rewritable disc that has not been 

finalized (For the finalization process, refer to 

the instruction manual that came with your disc 

writing software or your disc recorder.)

 - An 8 cm (3 inch) disc (An attempt to insert using 

an adapter can cause malfunction.)

•  Do not touch the recording surface of the disc.
•  Do not stick tape etc. on the disc, or use a disc with 

tape stuck on it.

•  Do not use any accessories for the disc.
•  Do not use any solvents to clean discs. Use a dry 

silicon or soft cloth.

•  Clean the disc by moving the cloth outward from 

the center of the disc.

•  When removing a disc from this unit, pull it out 

horizontally.

•  If the center hole or outside rim of a disc has burrs, 

remove them  before inserting a disc.

If the unit fails to operate properly, press the Reset 

button. The unit returns to the factory settings when 

the Reset button is pressed.

A maximum of 2 remote controls (KCA-RC107MR or 

KCA-RC55MR; optional accessory) can be used with 

the KMR-550U. For details on how to use the remote 

control, refer to the operation manual attached to it. 

When using the remote control with this unit, you 

should register the remote control ID. For details, refer 

to 

.