Kenwood KMR-550U Manual Do Utilizador
8
|
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
English
|
9
Audio preset recall
You can recall the Audio control items registered to
the
the
.
1
Select a source
Press the [SRC] button.
Press the [SRC] button.
2
Enter the Audio control mode
Press the Control knob.
Press the Control knob.
3
Select the Audio preset memory mode
Select the following items using the Control
knob.
“Detailed Settings”
Select the following items using the Control
knob.
“Detailed Settings”
>
“Audio Preset”
4
Select the Audio preset recall
Turn the Control knob to select “Recall”, and
then press the Control knob.
Turn the Control knob to select “Recall”, and
then press the Control knob.
5
Determine the selection
Turn the Control knob to select “YES”, and then
press the Control knob.
“Recall Completed” is displayed.
Turn the Control knob to select “YES”, and then
press the Control knob.
“Recall Completed” is displayed.
6
Exit the Audio Control mode
Press and hold the [ ] button.
Press and hold the [ ] button.
Audio preset memory
You can register the values set the Audio control
items.
items.
1
Set the audio control items
Refer to
Refer to
.
2
Enter the Audio control mode
Press the Control knob.
Press the Control knob.
3
Select the Audio preset memory mode
Select the following items using the Control
knob.
“Detailed Settings”
Select the following items using the Control
knob.
“Detailed Settings”
>
“Audio Preset”
4
Select the Audio preset memory
Turn the Control knob to select “Memory”, and
then press the Control knob.
Turn the Control knob to select “Memory”, and
then press the Control knob.
5
Determine the selection
Turn the Control knob to select “YES”, and then
press the Control knob.
“Memory Completed” is displayed.
Turn the Control knob to select “YES”, and then
press the Control knob.
“Memory Completed” is displayed.
6
Exit the Audio Control mode
Press and hold the [ ] button.
Press and hold the [ ] button.
⁄
• Register a pair of Audio preset memories. You cannot
register them by source.
• When you press the [Reset] button, audio control values of
all sources will be set to the values registered here.
• The following Audio control items can be registered.
“Bass Center FRQ”
*
, “Bass Level”, “Bass Q Factor”
*
, “Bass EXT”
*
,
“Middle Center FRQ”
*
, “Middle Level”, “Middle Q Factor”
*
,
“Treble Center FRQ”
*
, “Treble Level”, “SubWoofer Level”, “HPF”,
“LPF SubWoofer”, “SubWoofer Phase”
*
KDC-X896, KDC-X496 only
Audio adjustments
⁄
• You can set Bass, Middle, and Treble levels for each source.
About Supreme
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate (less than 128Kbps, Sampling
frequency is 44.1kHz).
Supplementing is optimized by a compression format (AAC,
MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate or variable bit rate or music that has a minimal high
frequency range.
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate (less than 128Kbps, Sampling
frequency is 44.1kHz).
Supplementing is optimized by a compression format (AAC,
MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate or variable bit rate or music that has a minimal high
frequency range.
1
Select the source to adjust
Press the [SRC] button.
Press the [SRC] button.
2
Enter the Audio control mode
Press the Control knob.
Press the Control knob.
3
Select the audio item subject to adjustment
Turn the Control knob to select the audio item
subject to adjustment and then press the
Control knob.
Press the [ ] button to return to the previous
item.
Turn the Control knob to select the audio item
subject to adjustment and then press the
Control knob.
Press the [ ] button to return to the previous
item.
4
Adjust the value set for the selected audio
item
Turn the Control knob to display the value to
adjust, and then press the Control knob.
The previous item is displayed.
item
Turn the Control knob to display the value to
adjust, and then press the Control knob.
The previous item is displayed.
5
Exit the Audio control mode
Press and hold the [ ] button.
Press and hold the [ ] button.
Audio control
You can adjust the following audio control items;
Display
Audio setting item Range
“SubWoofer Level”
Subwoofer level
–15 — +15 (dB)
“Bass Level”
Bass level
–8 — +8 (dB)
“Middle Level”
Middle level
–8 — +8 (dB)
“Treble Level”
Treble level
–8 — +8 (dB)
“Equalizer PRO”
*
“Bass Adjust”
“Bass Center FRQ” Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
“Bass Level”
“Bass Level”
Bass level
–8 — +8 (dB)
“Bass Q Factor”
Bass Q Factor
1.00/ 1.25/ 1.50/ 2.00
“Bass EXT”
Bass Extend
OFF/ ON
“Middle Adjust”
“Middle Center
FRQ”
Middle Center
Frequency
0.5/ 1.0/ 1.5/ 2.5 (kHz)
“Middle Level”
Middle level
–8 — +8 (dB)
“Middle Q Factor” Middle Q Factor
0.75/ 1.00/ 1.25
“Treble Adjust”
“Treble Center
FRQ”
Treble Center
Frequency
10.0/ 12.5/ 15.0/
17.5 kHz
“Treble Level”
Treble level
–8 — +8 (dB)
“Preset Equalizer”
Preset Equalizer curve “Rock”/ “Pops”/ “Easy”/
“Top40”/ “Jazz”/
”Powerful”/ “Natural”/
“User”
‡
“Bass Boost”
Bass Boost
“Level1”/ “Level2”/
”Level3”/ “OFF”
“Loudness”
Loudness
“Level1”/ “Level2”/
“OFF”
“Balance”
Balance
Left 15 — Right 15
“Fader”
Fader
Rear 15 — Front 15
“SubWoofer”
Subwoofer output
OFF/ ON
“Detailed Settings”
“HPF”
High Pass Filter
Through/ 100/ 120/
150 (Hz)
“LPF SubWoofer” Low Pass Filter
85/ 120/ 160/ Through
(Hz)
“SubWoofer
Phase”
Subwoofer Phase
Reverse (180°)/
Normal (0°)
“Supreme”
Supreme setting
ON/ OFF
“Audio Preset”
Audio Preset memory
†
Recall/ Memory
“Volume Offset” Volume offset
–8 — ±0 (dB)
(AUX: -8 — +8)
*
Function of KDC-X896/ KDC-X496.
†
Refer to
.
‡
“User”: The customized Bass, Middle, and Treble settings
are effective.