Kenwood KDC-452U Manual Do Utilizador

4   |   Quick Start Guide

Turn off the Demonstration mode when 
you use the unit for the first time after 
installation. (KDC-X896/ KDC-BT852HD/ 
KDC-X496/ KDC-452U only)

Press the Control knob to quit the 
Demonstration mode when the message 
“To cancel DEMO Press the volume knob” 
is displayed (approx. 15 seconds).

Turn the Control knob and press it 
when “YES” is displayed. 
The Demonstration mode can also be 
canceled in the Function Setting mode. 
Refer to <Demonstration mode setting> 
(page 36) in Instruction manual

Press the [DISP] button several times to 
display the clock.

Press and hold [DISP] button.

Turn the Control knob to adjust the 
hour, and then press the Control knob.

Turn the Control knob to adjust the 
minute, and then press the Control 
knob.

Press the Release 

button.

¤

•  Remove the faceplate at once after 

pressing the Release button; otherwise it 
can fall down due to vibration.

•  The faceplate is a precision component of 

the unit and can be damaged by shocks 
or jolts. 

•  Keep the faceplate in its case while 

detached.

•  Do not place the faceplate (and case) in 

areas exposed to direct sunlight, excessive 
heat or humidity. Also avoid places with 
too much dust or the possibility of water 
splashing.

B59-2127-00_00_12Stepup_QSG_K.indb   4

11/12/19   11:35