Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Philips
  4. MCD2160
  5. Manual Do Utilizador

Philips MCD2160 Manual Do Utilizador

Download
Página de 26
11 EN
Note
 
•
The unit switches to Eco Power Standby mode after 15 
minutes in standby mode.
Switch between standby mode and ECO 
standby mode:
Press and hold   for more than two seconds.
Find the correct viewing 
channel
1 
Press DISC to switch to disc mode.
2 
Turn on the TV and switch to the correct 
video-in channel in one of the following 
ways:
•  Go to the lowest channel on your TV, 
and then press the Channel Down 
button until you see the blue screen.
•  Press the source button repeatedly on 
the remote control of your TV. 
Tip
 
•
The video-in channel is between the lowest and highest 
channels and may be called FRONT, A/V IN, VIDEO etc. 
See the TV user manual on how to select the correct 
input on the TV.
Select the correct TV system
Change this setting if the video is not displayed 
correctly. By default, this setting matches the 
most common setting for TVs in your country.
1 
Press  .
2 
Select [Setup] (Setup) -> [Video] (Video) 
-> [TV System](TV System).
3 
Select a setting and press OK.
•  [PAL] (PAL) - For TV with PAL color 
system.
•  [Multi] (Multi) - For TV that is 
compatible with both PAL and NTSC.
•  [NTSC] (NTSC) - For TV with NTSC 
color system.
4 
To return to the previous menu, press  .
5 
To exit the menu, press  .
Change system menu 
language
1 
Press  .
2 
Select [Setup] (Setup) -> [General] 
(General) -> [OSD Language] (OSD 
Language), and press OK.
3 
Select a setting and then press OK.
4 
To exit the menu, press  .
Turn on Progressive Scan
Progressive scan displays twice the number of 
frames per seconds than interlaced scanning 
(ordinary TV system). With nearly double the 
number of lines, progressive scan offers higher 
picture resolution and quality.
Before you turn on this feature, make sure that:
•  the TV supports progressive scan signals.
•  you have connected the unit with the TV 
through component video.
1 
Turn on the TV.
2 
Make sure that the TV progressive scan 
mode is deactivated (see the TV user 
manual).
3 
Switch the TV to the correct viewing 
channel for this unit.
4 
Press DISC, and then press  .
5 
Select [Setup] (Setup) -> [Video] (Video) 
-> [Progressive] (Progressive) -> [On] 
(on), and then press OK.
 
»
The progressive setup is complete.