Meyer Sound MPS-488HP Manual Do Utilizador
MM-10 OPERATING INSTRUCTIONS
35
Dual Channel
To configure a dual-channel satellite system with one
MM-10ACX and two MM-4XPs:
MM-10ACX and two MM-4XPs:
1. Connect the left audio signal to Audio In for Satellite 1 on
the MM-10ACX.
2. Connect the right audio signal to Audio In for Satellite 2
on the MM-10ACX.
3. Connect the Satellite 1 Out from the MM-10ACX to the
loudspeaker input of left MM-4XP.
4. Connect the Satellite 2 Out from the MM-10ACX to the
loudspeaker input of the right MM-4XP.
5. Set the Input Select switch on the MM-10ACX to
SUM CH 1+2 (up).
6. If necessary, to accommodate for the placement of the
subwoofer and satellite loudspeakers, adjust the Input
Polarity switch and Gain knob on the MM-10ACX.
Polarity switch and Gain knob on the MM-10ACX.
MM-10ACX Dual-Channel Satellite System (Shown with EN3 Connectors)
Balanced audio,
dual channels, to
Satellite 1 Audio In
and Satellite 2 Audio In
dual channels, to
Satellite 1 Audio In
and Satellite 2 Audio In
Satellite 1 Out and
Satellite 2 Out to MM-4XPs
(Balanced audio, 48 V DC)
AC power
to AC Input
to AC Input