Meyer Sound MPS-488HP Manual Do Utilizador

37

The MM-10 is available with top and side nut plates with 
either 3/8"-16 or metric M10 threaded nuts. The optional 
MUB-MM10 u-bracket mounts the MM-10 on ceilings and 
walls at adjustable angles.

When installing Meyer Sound loudspeakers, the following 
precautions should always be observed:

■

All Meyer Sound products must be used in accordance 
with local, state, federal, and industry regulations. It is 
the owner’s and user’s responsibility to evaluate the reli-
ability of any rigging or mounting method for their appli-
cation. Rigging should only be carried out by 
experienced professionals.

■

Use mounting and rigging hardware that has been rated 
to meet or exceed the weight being hung.

■

Make sure to attach mounting hardware to the building's 
structural components (studs or joists), and not just to 
the wall surface. Verify that the building's structure and 
the anchors used for the installation will safely support 
the total weight of the mounted loudspeakers.

■

Use mounting hardware appropriate for the surface 
where the loudspeaker will be installed.

■

Make sure bolts are tightened securely. Meyer Sound 
recommends using Loctite

®

 on bolt threads and safety 

cables.

■

Inspect mounting and rigging hardware regularly. Imme-
diately replace any worn or damaged components.

The MUB-MM10 U-bracket mounts the MM-10 on ceilings 
and walls at adjustable angles. The U-bracket’s adjustment 
slot lets you adjust how close the MM-10 is located to the 
mounting surface and at what angle the subwoofer will be 
positioned. The MUB-MM10 is available in two kits with 
either 3/8"-16 hardware (PN 40.199.060.01) or M10 hard-
ware (PN 40.199.060.02).

The MM-10 can be mounted on a ceiling or underbalcony 
area with the MUB-MM10 U-bracket.