IBM 21Y Manual Do Utilizador
50
Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
Þ
1Ý
Bay A
Þ
2Ý
Bay B
Þ
3Ý
Bay C
Þ
4Ý
Bay D
Þ
5Ý
Bay E
Þ
6Ý
Bay F
Þ
7Ý
Bay G
To remove or install a drive, you must turn off the server first.
Diskette drives, tape drives, and CD-ROM drives are remov-
able media drives. You can install removable media drives
in bays A, B, C, and D. You can install hard disk drives in
bays B, C, E, F, and G.
Diskette drives, tape drives, and CD-ROM drives are remov-
able media drives. You can install removable media drives
in bays A, B, C, and D. You can install hard disk drives in
bays B, C, E, F, and G.
•
The server comes with a 3.5-inch, 1.44 MB diskette
drive in bay D, an IDE CD-ROM drive in bay A, and a
hard disk drive installed in bay G (in some models).
drive in bay D, an IDE CD-ROM drive in bay A, and a
hard disk drive installed in bay G (in some models).
•
The Netfinity 3500 M20 server supports only one dis-
kette drive.
kette drive.
•
The diskette drive uses 1 MB and 2 MB diskettes. For
optimum use, format 1 MB diskettes to 720 KB and for-
mat 2 MB diskettes to 1.44 MB.
optimum use, format 1 MB diskettes to 720 KB and for-
mat 2 MB diskettes to 1.44 MB.
•
Bay B comes without a device installed. This bay is for
either a 5.25-inch, half-high, removable-media drive,
such as a tape backup drive, or a 3.5-inch SCSI slim
high hard disk drive. If you install a 3.5-inch hard disk
drive in this bay, you must use the 3.5-inch conversion
kit for a 5.25-inch bay supplied with the option.
either a 5.25-inch, half-high, removable-media drive,
such as a tape backup drive, or a 3.5-inch SCSI slim
high hard disk drive. If you install a 3.5-inch hard disk
drive in this bay, you must use the 3.5-inch conversion
kit for a 5.25-inch bay supplied with the option.
M2
0
Ne
tfini
ty 3
500