Husqvarna WH4818 / 966638602 Manual Do Utilizador
ContRols
16
Operator Presence Switches
located on the handle, the Operator Presence
System levers serve as an additional safety feature.
An electrical interlock safety system is activated
by depressing either one or both of the Operator
Presence levers at the handle grips.
Releasing both Operators Presence levers while
mowing or transporting will break the electrical circuit
and cause the engine and mower to stop. The mower
will not stop immediately after releasing the OP levers
and some travel occurs.
When either the blades or the speed control are
engaged, one or both levers must be pressed for the
engine to remain running.
System levers serve as an additional safety feature.
An electrical interlock safety system is activated
by depressing either one or both of the Operator
Presence levers at the handle grips.
Releasing both Operators Presence levers while
mowing or transporting will break the electrical circuit
and cause the engine and mower to stop. The mower
will not stop immediately after releasing the OP levers
and some travel occurs.
When either the blades or the speed control are
engaged, one or both levers must be pressed for the
engine to remain running.
Ground Speed Control
Ground speed is adjusted with the center lever on the
control panel. ease the lever out of the start position
and upwards to the desired speed.
control panel. ease the lever out of the start position
and upwards to the desired speed.
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
To engage the control, pull the choke out to its extent.
Do not use the choke when starting a warm engine.
the engine with a richer fuel mixture.
To engage the control, pull the choke out to its extent.
Do not use the choke when starting a warm engine.
8062-044
Operator presence lever - left hand
8062-003
Ground speed control
8062-003
Choke control