Husqvarna WH4818 / 966638602 用户手册

ContRols

16

located on the handle, the Operator Presence 
System levers serve as an additional safety feature. 
An electrical interlock safety system is activated 
by depressing either one or both of the Operator 
Presence levers at the handle grips.
Releasing both Operators Presence levers while 
mowing or transporting will break the electrical circuit 
and cause the engine and mower to stop. The mower 
will not stop immediately after releasing the OP levers 
and some travel occurs.
When either the blades or the speed control are 
engaged, one or both levers must be pressed for the 
engine to remain running.

Ground speed is adjusted with the center lever on the 
control panel. ease the lever out of the start position 
and upwards to the desired speed.

The choke control is used for cold starts to provide 
the engine with a richer fuel mixture.
To engage the control, pull the choke out to its extent. 
Do not use the choke when starting a warm engine.

8062-044

8062-003

8062-003