Jacuzzi J - 480 Manual Do Utilizador

Page 76

14. Audio Communication Malfunction: Communication between the 

control panel and audio system is faulty. Shutdown power to the 

spa, wait 3 seconds and restart the spa to reset the communication. 

Contact your authorized dealer or service organization.

15. Blinking Heater icon: This icon will blink on and off to indicate that:

 

•  The temperature sensor is sensing a -20°F/6°C 

difference between the actual and set temperature or;

•  The temperature sensor is sensing a temperature above 

112°F/44°C or the hi-limit temperature sensor is sensing 

a temperature above 116°F/46°C.

16. Extended Temperature 

Activated:

 

The spa is set to go up to 

104°F (40°C), but it can 

be set to reach 106°F 

(41°C). To access the 

extended temperature you must press the “Up” (on the 

Quad Keypad) button and the button D at the same time for 2 

seconds. The system will now allow you to raise the temperature to 

106°F (41°C) and the LCD display will read 

teMPerature aCtivateD” (Figure A). To clear this message, 

just press the Down button on the Quad Keypad to lower the 

temperature below or back to 104°F (40°C).

17.  Please Check Filter!

 

This message will appear when the filter  

reminder time has expired (Figure B). 

Please remove the Proclear filters and 

filter bag for cleaning or replacement. 

18.  Feature not installed: (Exterior lights)

 

This message will appear when a 

user tries to activate the exterior 

lights and they are not installed 

(Figure C). To clear the message 

press button D to return to Main 

Menu.

106

F

Temp.

6:45 PM

Extended Temperature 

Activated

UP

C

B

A

D

Figure A

102

F

Temp.

6:45 PM

Please check filter!

Figure B

EXTERIOR

Feature not installed

C

B

A

D

Figure C